Tag Archives: flex
Front & Rear Drilled Brake Rotors + Pads for Ford Explorer Flex Taurus MKT
Ford Explorer 2011 2012, Ford Explorer 2013 2014 2015 2016 2017 2018 2019 – 325mm (12.80) Diameter Front Rotor 330mm (12.99) Diameter Rear Rotor, Ford Flex 2009 2010 2011 2012, Ford Flex 2013 2014 2015 2016 2017 2018 2019 – 325mm (12.80) Diameter Front Rotor, Ford Taurus 2010 2011 2012 – Exc Performance Pkg, Ford Taurus 2013 2014 2015 2016 2017 2018 2019 – Exc SHO, Lincoln MKS 2009 2010 2011, Lincoln MKS 2012 – To Feb 05 2012, Lincoln MKT 2010 2011 2012, Lincoln MKT 2013 2014 2015 2016 2017 2018 2019 – 325mm (12.80) Diameter Front Rotor. 2013, 2014, 2015, 2016, 2017, 2018, 2019. 325mm (12.80″) Diameter Front Rotor, 330mm (12.99″) Diameter Rear Rotor. 2009, 2010, 2011, 2012. 325mm (12.80) Diameter Front Rotor. Exc Performance Pkg. To Feb 05, 2012. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Drilled Slotted Rotors + Pads for Ford Explorer Flex Lincoln MKT
Performance Max Brakes Kit. Please note that the rotors and pads may change in style depending on the car models specification. Performance Front Rotors. Performance Rear Rotors. Elite Max Front Pads. Elite Max Rear Pads. Pair of Gloves. 2013, 2014, 2015, 2016, 2017, 2018, 2019. 352mm (13.86″) Diameter Front Rotor, 345mm (13.58″) Diameter Rear Rotor. 352mm (13.86) Diameter Front Rotor. SHO – SHO. 2013, 2014, 2015, 2016. Performance Driven: Stable braking performance across a wide temperature range. Versatile Excellence: Tailored for cars, SUVs, vans, and trucks, this brake kit adapts seamlessly to diverse vehicles. Rounded Slots Slots boost brake grip, cut stopping distance in wet conditions, and deter pad glazing by expelling gas and debris. Cross-Drilled Drilled holes provide maximum rotor cooling during extreme operating conditions and feature a chamfer design to reduce the potential for cracking. Black Coating Eco-conscious black e-coating delivers long-lasting protection against rust and corrosion, ensuring maximum durability. Aesthetic look The cross-drilled and slotted rotor design provides a striking and eye-catching visual appeal for vehicles with open-wheel designs. ELITE MAX BRAKE PADS FEATURES. Accessories Included For silencing brake noise and providing lubrication to the calipers. Stainless steel hardware is included for effortless installation. Chamfer & Slots Design Precision-engineered for optimal performance, ensuring silent stops and a safer drive. Dual-Layer Rubber Shims Engineered to deliver brake performance without unwanted noise. Positive Mold Technology The design ensures consistent friction material density, resulting in even wear, braking performance, and pedal feel. Cross Drilled, Slotted Black Anti-rust E-Coating. Silver Geomet Anti-rust Coating. Asbestos-Free Copper-Free (Minimal Dust). Asbestos-Free Low-Copper (Low Dust). Performance Rotors + Elite Max Brake Pads. Comfort Rotors + Elite Max Brake Pads. Style Rotors + Carbon Ceramic Brake Pads. Value Rotors + Carbon Ceramic Brake Pads. Choose a reason and add comments if needed. Upload photos if the item is damaged. Submit the return request.
BRAND NEW CCM Jetspeed FT6 Pro P29 85 Flex LEFT HANDED Hockey Stick
Introducing the top-of-the-line CCM Jetspeed FT6 Pro hockey stick, designed for adult players who prefer the left-handed orientation. This stick is made of high-quality carbon material with a P29 blade pattern and 85 flex for optimum performance on the ice. The stick measures 62 inches in length and comes in a vibrant multicolor design that adds to its overall appeal. Ideal for ice hockey enthusiasts, this stick is the perfect addition to your collection. Get your hands on this brand new CCM Jetspeed FT6 Pro hockey stick and take your game to the next level. IF ANOTHER FLEX OR CURVE IS NEEDED MSG ME AND WE CAN WORK SOMETHING OUT.
Cobra King Radspeed XB Driver Choose Your Color, Loft and Flex
COBRA RADSPEED XB DRIVER. Brand New 2021 Golf Clubs. Available in Black/Turbo Yellow, Peacoat-Blue/Red, or Turbulence-Grey/Turbo Yellow. Head Cover + Tool Included. We are an authorized Cobra Golf retailer! By increasing the distance between the front and back weights, we are able to create faster ball speed while maintaining forgiveness. A perfect balance of front and back RADIAL WEIGHTING delivers low spin for enhanced speed with maximum stability. The RADSPEED XB driver features 20g positioned in the back (14g of fixed weight and a 6g interchangeable weight) to create maximum stability for forgiveness on off-center hits. An additional 8g of fixed weight is positioned in the front to lower spin for faster ball speeds and the longest drives. CNC MILLED INFINITY FACE. An infinity edge face design expands the milled area by 95%, increasing the zone of maximum ball speed. THIN-PLY CARBON WRAP CROWN. A lighter carbon wrap crown design features a new carbon fiber material that is 30% thinner which creates another 6 grams of discretionary weight that can be repositioned to optimize performance. A refined T-Bar Speed Chassis design is 7 grams lighter, giving us even more discretionary weight to position more mass forward within the frame to decrease spin and increase ball speed. Loft Settings -1.5° / -1.0° / -1.0° Draw /. / STD° Draw / +1.0° / +1.0° Draw / +1.5°. Length with COBRA CONNECT. Length with Standard Grip. 7.5° / 8.0° / 8.0° Draw /. / 9.0° Draw / 10.0° / 10.0° Draw / 10.5°. F3: D3.5 HZRDUS: D2.5. 9.0° / 9.5° / 9.5° Draw /. / 10.5° Draw / 11.5° / 11.5° Draw / 12.0°. F3: D3.5 HZRDUS: D2.5 Riptide: D2.5(Lite), D1.5 (R). 10.5° / 11.0° / 11.0° Draw /. / 12.0° Draw / 13.0° / 13.0° Draw / 13.5°. Riptide: D2.5(Lite), D1.5 (R). Fujikura Motore X F3. Project X HZRDUS Smoke RDX Blue. Project X HZRDUS RDX Blue. Extra Stiff (6.5). Project X Even Flow Riptide. Thank you for shopping with the Wide World of Golf! This item is in the category “Sporting Goods\Golf\Golf Clubs & Equipment\Golf Clubs”. The seller is “wideworldofgolf” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.
- Flex: Stiff
- Loft: 10.5
- Color: Blue/Red
- Handedness: Right-Handed
- Shaft: Project X HZRDUS Smoke RDX Blue
- Model: Radspeed XB
- Country/Region of Manufacture: Unknown
- Department: Men
- Custom Bundle: No
- Club Number: 1-Wood
- Personalize: No
- Grade: Store Line
- Customized: No
- Item Length: 46 in
- Golf Club Type: Driver
- Head Material: Carbon Graphite
- Brand: Cobra
- Manufacturer Warranty: 2 years
- Shaft Material: Graphite
- Number of Clubs: 1
- Personalized: No
- Lie Angle: Standard
For Ford Explorer Flex Taurus Front+Rear Brake Rotors + Carbon Ceramic Pads
FITS THE FOLLOWING VEHICLES. Fits: Ford Explorer 2013 – 2019 – Models With Heavy Duty Brakes Only (13.86″ Front Rotors) Fits: Ford Flex 2013 – 2017 – Models With Heavy Duty Brakes Only (13.86″ Front Rotors) Fits: Ford Police Interceptor Sedan 2013 – 2019 Fits: Ford Special Service Police Sedan 2014 – 2018 Fits: Ford Taurus 2013 – 2019 Police Equipped Models Only Fits: Ford Taurus SHO 2013 – 2019 Fits: Lincoln MKS 2013 – 2016 Fits: Lincoln MKT 2013 – 2019 Models with Vented Rear Rotors and Caliper Parking Brake. JOIN THOUSANDS OF OUR HIGHLY SATISFIED CUSTOMERS. Please read all fitment information provided above to verify your vehicle has the correct parts. All rotors are precision machined for exact OEM In-stock replacement. Please don’t forget to read proper fitment information listed in the check vehicle fits section listed above for your vehicles correct parts. Our Brakemotive brake pads are only included in applicable listings. Please always check the “What’s Included” section for more information regarding BrakeMotive quality brake pads. Compared to competitors our pads are unmatched in the market. HIGHEST QUALITY VALUE FOR YOUR BUCK. The BrakeMotive brake pads are of highest quality and prevent frequent issues as well as maintenance. This includes issues such as dust, rim coloration, and the overall life expectancy of your brake related parts. Best non-ferrous compound (Non-Metal) for fast break-in. More Quiet braking power. CARBON CERAMIC: BRAKE PAD FORMULA. Made from original equipment spec’s. RUB YOUR FINGER, IS IT DUSTY? Sign of poor noise insulation. CERAMIC: FEEL THE EDGES, SEE THE COLOR? Harsh metal compound (Ferrous) means slow break-in and more dust. Single layer metal shim means more noise & uneven caliper connection. Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking. This insures that the hottest part of the rotor gets cooled. The fact is that the drill holes greatly improve convection heat transfer and the result is more brake pad bite. LEADING IN VALUE AND PERFORMANCE. Cross-drilled rotors keep the brakes up to 150 degress cooler to prevent rotor warping. Therefore your pads last even longer and your rotors still look good. ACTUAL SILVER ZINC PLATING. Electro-Chemical Zinc Plating is the best way to protect metal from rust. Some brands use a light oil / grease film coating over the rotors. HI-DENSE CERAMIC CARBON COMPOUND. Brakemotive auto-parts is now providing carbon ceramic brakes. These Carbon Brake pads are designed for scenarios that require high stopping power. BEST QUALITY IN BRAKES. Why choose carbon fiber? For instance, brake pads developed with carbon fiber can ensure a mess free clean rim and tire. Reason’s why is because the carbon fiber in these pads are tougher than the typically compound found in ceramic pads, which allows the rotor to wear slower and more evenly, preventing constant wheel checks and repairs. The Carbon fiber brake pads are equipped with a premium backing plate. This included a powder coating to withstand rust/corrosion and extreme temperatures. Always check you vehicles fitment information before proceeding with your order. This will allow your business with us to be very progressive! Created to prevent rust and corrosion each brake pad is equipped with a powder coated backing plate. THERMAL SCORCHED FOR FAST BREAK-IN. Carbon Ceramic brake Pads have been thermal scorched to offer superior resistance for a clean rotor surface wear. CARBON + CERAMIC BRAKE PAD COMPOUND. Brakemotive brake pads are formulated with a new high quality carbon fiber material. These pads last longer than typical pads & a cleaner resistance to rotor metal. OE CHAMFERED & SLOTTED. Factory standards chamfered and slotted carbon ceramic brake pads to ensure a truly quiet braking experience. FOLLOW STEPS FOR PROPER BREAK-IN. The break-in procedure is critical to superior braking performance. A proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. Break-in new brake pads/rotors using the pad bedding procedure as follows. Proper Pad bedding can prevent rotor warping. Do not come to a complete stop. The brakes to cool. Before the brakes cool. Expect a smell of resin as brakes are hot. With moderate brake use, allowing the heated brakes to. LONG LASTING HIGH QUALITY ROTORS. Cross-drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691. The effect of rotors cross-drilled brake performance. That is why Corvette, Porsche. Mercedes and BMW vehicles come with factory direct with drilled and slotted rotors, i. Not dimpled or slotted. High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross-drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping. OPTIMUM COOLING / DURABILITY. WARNING:This product can expose you to chemicals including Chromium (hexavalent compounds) and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. ROUNDED SLOTS ARE BETTER! Every slot is chamfered for a smooth linear transition at the edge. Electro-chemical plating is the best way to protect metal from rust. Some brands use painted rotors that peel or discolor when the rotors get hot. Zinc Plating Does Not Apply To Hub and Rotor Assemblies! Please see item specifics above for details on surface finish. DRILL HOLES PREVENT ROTOR WARPING. Drill holes allow air to flow over and through the vanes to improve convection heat transfer and keep the rotors up to 150 degrees cooler. Our premium rotors are designed with several cooling vanes that keep the rotor from long term negative effects such as warping. PREVENT ROTOR & CALIPER DAMAGE. Customers who choose BrakeMotive, experience cleaner wheels, and easy “Brake-pad-swap-out” Try BrakeMotive for performance brake parts. Most vehicles (hardware included if applicable). PERFORMANCE KITS ARE THE WAY TO GO. Brakemotive parts = High Performance! /// front & rear kits = one time job experience! Each of our Brake Motive products are 100% certified and tested to insure product satisfaction. In the following charts we have listed our premium brake pads in a carefully analyzed testing procedure over a period of 1430 typical foot to pedal braking stops. Our Brake Pads offer sustainable braking power, that has been performance tested to withstand harsh braking environments. Our Ceramic and metallic brake pads are leading in the market providing long lasting quality brakes. BRAKEMOTIVE LEADS IN PERFORMANCE. Our Kinetic ceramic brake pads are top quality for performance and customer expectations for not only our brand leading performing brakes, but an enduring quiet and more smooth riding experience. Brakemotive is one of the largest brake supplier in North America, with over 350,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our perfomance rotor and ceramic brake pad kits is at or below the cost of equivalent plain rotors and brake pads from your neighborhood retail store. Experienced engineering team uses advanced CAD (computer aided design) software to configure the rotor drill holes and slots for best optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the part fitments information in this listing before your order. The Brakemotive team members are available to answer your questions Monday through Friday from 8:30am CST to 6:00pm CST and Saturday from 9:30am CST to 4:30pm CST. If you can’t find the parts for your vehicle, just give us a call. Brakemotive it our responsibility to keep our customers 100% satisfied. This will ensure that your package does not end up damaged during transit. Not to worry, your order will still get to you quickly and efficiently! Additional charges may be incurred for international callers, please contact your provider for more details. Times vary by country. INTERNATIONAL BUYERS ARE NOT ELIGBLE FOR THE CALIPER CORE RETURN PROGRAM. ALL PARTS MADE TO U. How many brake pads are in a “set”? On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Is the brake rotor picture the same as the rotor I will receive? The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. Are any modifications necessary to make these rotors fit my vehicle? No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Metallic Vs Ceramic Brake Pads? Ceramic pads are quieter, however, metallic pads are more appropriate from constant tough braking like trucking, hauling, intense highway driving or racing. Will I get Tracking Information? Are the drilled holes and slots directional? Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. What causes rotor warping? Rotor warping is cause from lack of maintenance to a vehicle rotors brakes calipers, and other braking components. Do I have solid rotors or vented rotors? Solid rotors usually contain a single thin solid metal braking surface. Vented rotors have vents/vanes between two solid rotor surfaces. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “brakemotive76″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Brand: Brakemotive
- Bolt Hole Quantity: 5
- Placement on Vehicle: Front, Rear, Left, Right
- Rotor Style: Drilled, Slotted
- Items Included: Brake Disc, Brake Pads
- Type: Brake Disc Rotor, Disc Brake Kit
- Manufacturer Part Number: BMT7237531052
- Manufacturer Warranty: 10 Years
- Interchange Part Number: GG1Z 1125-A, Centric: 120.65136, Raybestos: 680982, WAGNER: BD180535, DG1Z2C026A, Centric: 120.65137, Raybestos: 680983, WAGNER: BD180536
- Brake Disc Style: Drilled & Slotted
- Brake Pad Compound: Carbon Fiber Ceramic Formula
- Fitment Type: Direct Replacement
- Front Lug / Bolt Circle: 5 x 114.3mm
- Front Rotor Size (inch): 13.86
- Front Rotor Weight (Lb p/rotor): 26.9
- Images: Images Are Examples, Product (Pad Color) May Vary.
- Lug Count: 5
- Other Part Number: DG1Z 1125-C;DG1Z 2C026-A
- Pad Material: Ceramic
- Rear Lug / Bolt Circle: 5 x 114.3mm
- Rear Rotor Size (inch): 13.58
- Rear Rotor Weight (Lb p/rotor): 16.31
- Solid Or Vented Front Rotor: VENTED
- Solid Or Vented Rear Rotor: VENTED
- Surface Finish: Silver Zinc Dichromate
- Year Range: 13;14;15;16
Brand New Bell Helmets Moto 9 Flex Carbon Small
Bell Helmets Moto 9 Flex Carbon – Small. The item “Brand New Bell Helmets Moto 9 Flex Carbon Small” is in sale since Sunday, August 15, 2021. This item is in the category “eBay Motors\Parts & Accessories\Apparel, Protective Gear & Merchandise\Helmets & Accessories\Motorcycle & Powersport Helmets”. The seller is “brandon21888″ and is located in Carlsbad, California. This item can be shipped to United States.
- Brand: Bell
- Design: Graphic
- Shell Construction: Carbon Fiber
- Type: Full Face
- Department: Unisex Adult
- Size: S
- Labels & Certifications: DOT Approved
- Color: Black
- Model: Moto 9 Flex
- Finish: Matte
- Performance/Activity: Motocross/Enduro
Brand new Bell Moto-9 Carbon Flex Helmet in BREAKAWAY MATTE NAVY/LIGHT BLUE
2021 Bell Moto-9 Carbon Flex Helmet in BREAKAWAY MATTE NAVY/LIGHT BLUE – Bell Motocross Helmets. No excuses, no extra weight, and no BS. Named Product of the Year by Transworld Motocross, the Moto-9 Carbon is the most advanced and progressive MX helmet ever. From the Ultra-light TriMatrix construction to exceptional features like the Velocity Flow Ventilation system and Flying Bridge Visor with QuickFlip adjustment, every inch of the Moto-9 Carbon was designed and developed for performance. Safety is just as important as performance, which is why the Moto-9 comes equipped with our exclusive Magnefusion Emergency Removal System (MERS) cheek pads and was designed to accommodate the Eject Helmet Removal System. These two features allow First Responders to gently remove the helmet from a rider’s head, reducing the potential for secondary neck or spine injuries. To protect and carry your helmet, the Moto-9 comes equipped with a deluxe padded helmet bag. Bell Moto 9 Carbon Flex Helmet. With improved fit, ventilation and safety features, the Moto-9 elevates the dirt helmet in just about every category. A TriMatrix Composite Shell keeps weight low and strength in the right places, while the Flying Bridge Visor is easily adjusted with two, hand-in-glove-adjustable, quick flip screws. Bells new magnetic cheek pad system – the Magnefusion Emergency Release System (MERS) permits quick removal in emergencies and easy cleaning and drying to keep your helmet dirt and bacteria-free. Moving outward on the helmet, the Bell Moto 9 features a souped-up version of Bell’s Velocity Flow Ventilation System, which literally pulls air through the helmet, keeping the rider cooler. Our Tri Matrix Composite Shell keeps weight low and strength in the right places, while the Flying Bridge Visor is easily adjusted with two hand-in-glove-adjustable QuickFlip screws that firmly hold the visor in place. The patented Magnefusion strap keeper replaces the often hard-to-locate strap snap with an elegant magnetic solution that easily engages and secures the strap end. Quite simply the best MX helmet ever. Lightweight Composite Tri-Matrix shell. Magnefusion Emergency Release System (MERS). Magnefusion Magnetic Strap Keeper. Padded chin strap with D-ring closure. X-Static® XT2 silver liner. Velocity Flow Ventilation system for maximum cooling. Fully adjustable Flying Bridge Visor with air intake vents. Removable/washable X-Static® XT2 silver liner. Exclusive Magnefusion Emergency Removal System (MERS) cheekpads. QuickFlip visor screws for easy adjustment even with gloves on. Fully ventilated EPS-lined chinbar. Integrated vented roost guard. New and approved Magnefusion magnetic strap keeper. (+/- 50g for size). The item “Brand new Bell Moto-9 Carbon Flex Helmet in BREAKAWAY MATTE NAVY/LIGHT BLUE” is in sale since Thursday, February 25, 2021. This item is in the category “eBay Motors\Parts & Accessories\Apparel, Protective Gear & Merchandise\Helmets & Accessories\Motorcycle & Powersport Helmets”. The seller is “1llmatic” and is located in Vilnius. This item can be shipped worldwide.
- Size: M
- Color: Blue
- Brand: Bell
Bell Moto 9 Carbon Flex Helmet Size Medium Brand New Jeremy McGrath LE
Product: Bell Moto 9 Flex – McGrath Replica. Condition: Brand New without Tags. Description: Hard to find Bell Moto 9 Flex McGrath replica! Top notch helmet with for a fraction of the price! Feel free to contact me with any questions. The item “Bell Moto 9 Carbon Flex Helmet Size Medium Brand New Jeremy McGrath LE” is in sale since Monday, July 26, 2021. This item is in the category “eBay Motors\Parts & Accessories\Apparel, Protective Gear & Merchandise\Helmets & Accessories\Motorcycle & Powersport Helmets”. The seller is “baume_blak” and is located in Berne, Indiana. This item can be shipped to United States.
- Size: M
- Brand: Bell
Brand New Bell Moto-9 Carbon Flex Fasthouse Day in the Dirt Red/Navy Medium
This is brand new, never worn bell motocross moto 9 flex helmet. Helmet also comes with helmet bag(Not pictured). The item “Brand New Bell Moto-9 Carbon Flex Fasthouse Day in the Dirt Red/Navy Medium” is in sale since Sunday, November 22, 2020. This item is in the category “eBay Motors\Parts & Accessories\Apparel & Merchandise\Helmets & Headwear\Helmets”. The seller is “brandon21888″ and is located in Carlsbad, California. This item can be shipped to United States.
- Gender: Unisex Adult
- Size: M
- Safety Standard Certification: DOT
- Style: Motorcycle
- Displayed Make: Bell Helmets
- Type: Full Face
- Color: Red
- Brand: Bell