Easton Axis 300 5mm Hunting Carbon Arrows! Crested/Dipped Bohning Blazer Vanes

BRAND NEW, NEVER USED!! Here are a FULL dozen brand new, never used Easton Axis 5mm Carbon Arrows fletched with the new Bohning Blazer Vanes & a CUSTOM DIP & CREST!! Clamp: Right Helical Clamp at Slight Offset Spine Size 300 Weight: 10.7 gpi Vane: 2 Bohning Blazer Vane Nock: X-Nock Insert: Easton HIT Insert, 16grain (if aftermarket inserts want to be used, request inserts to be sent loose/uninstalled). NOTE: You must let me know your arrow length. I can not start building your arrows without this information. Let me know the length measuring from inside groove of nock to end of shaft. If you don’t need cut, be sure to let me know as well. Inserts will be sent loose on full length arrows, and inserts will be installed on arrows requested to be cut. If you do not want inserts install, you MUST let me know with your arrow length message. I will not start to build your arrows until I have your arrow length specs. The hands-down proven small diameter all carbon arrows. Millions of successful hunts testify to the awesome effectiveness of a simple concept that equates to more downed big game. The AXIS micro profile focuses the kinetic energy into an ultra-small frontal area for less friction and thus greater penetration. AXIS penetrates deeper as the shaft passes through animals with less friction behind the broadhead channel. The small diameter also means that AXIS arrows fly much better in crosswinds than regular carbon arrows. That means broadheads will find the aim-point more often in the field. Micro diameter focuses energy into a small frontal area for less friction and greater penetration. Smaller side profile helps keep the arrow on target in crosswinds. Offers 24% more Kinetic Energy Density than standard diameter carbon arrows for more big game stopping penetration. 003-weight and spine matched for top level accuracy. These arrows are custom dipped, crested, and fletched for a unique look and great performance. This is all done by hand, and is not a cheap vinyl stick on wrap. The shafts have been dipped in a white arrow dipping paint. The white dip is unique in that in not only looks great, but helps in shooting. The white dip allows you to watch the arrow fly which is especially helpful when recording a hunt or working on arrow flight. Not to mention, it makes them easier to find! Once the dipping process is finalized and dry, the arrows are placed in a crester. This spins the arrow at a high speed allowing for a unique and custom crest. These arrows are crested with a 2 3/4 crest. They are done in a unique green, black, and white crest highlighted with silver lines. The arrows are finished by fletching the dipped and crested shafts by hand in a fletching jig. They are fletched with a Blazer vane by hand, so you won’t get a cheap, thin machine-fletch vane. The arrows included 3, Bohning Blazer vanes. Neon green and neon yellow, which matches the arrows nicely. Along with the fl. Green nocks, the arrows look even better. These arrows are made to order. I can normally have arrows at your door in about two weeks. These are custom built, made to order arrows.