Tag Archives: textured
3D Carbon Fiber Black Matte Textured Car Vinyl Wrap Sticker Decal Film Sheet DIY
3D Carbon Fiber Black Matte Textured Car Vinyl Wrap Sticker Decal Film Sheet DIY. Automotive Vinyl Wrap Film. Gloss / Gloss Metallic. Matte / Satin / Matte Metallic. Leather / Suede / Velvet. One Way Vision Privacy. Wrapping & Tinting Tools. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Application: from +10°? To +20°? , usage from -30°? To +30°? Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D Carbon Fiber Black Matte Textured Car Vinyl Wrap Sticker Decal Film Sheet DIY
3D Carbon Fiber Black Matte Textured Car Vinyl Wrap Sticker Decal Film Sheet DIY. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Application: from +10°? To +20°? , usage from -30°? To +30°? Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D Carbon Fiber Sky Blue Matte Textured Car Vinyl Wrap Sticker Decal Sheet DIY
3D Carbon Fiber Sky Blue Matte Textured Car Vinyl Wrap Sticker Decal Sheet DIY. Automotive Vinyl Wrap Film. Gloss / Gloss Metallic. Matte / Satin / Matte Metallic. Leather / Suede / Velvet. One Way Vision Privacy. Wrapping & Tinting Tools. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D Carbon Fiber Textured Black Matte Vinyl Wrap Sticker Decal Air Bubble Free
3D Carbon Fiber Vinyl Wrap Air Release Technology Free Wrapping Tools. Free Tool Kit Requirement. Size 4″x8″ DO NOT come with Tool Kit. Size 12″x60″ and above Include 1 set of Tool Kit. Each order come with maximum 1 set of Tool Kit. Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal and painted metal surfaces. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use.
Premium 3D Carbon Fiber Matte Textured Vinyl Wrap Sticker Decal Air Bubble Free
3D Carbon Fiber Vinyl Wrap Air Release Technology Free Wrapping Tools. This vinyl is designed for vehicle exterior wrap use ONLY. Always pre-test vinyl installation on vehicles. This vinyl is not originally designed for plotter or cutter use.
Textured Front Bumper Fit 2018-2022 JEEP WRANGLER JL Rock Crawler with Winch Plate
Home
⟩ textured ⟩ Textured Front Bumper Fit 2018-2022 JEEP WRANGLER JL Rock Crawler with Winch Plate
2018 – 2022 Jeep Wrangler JL. Color: Black Material: Carbon Steel Installation & Position: Direct Bolt-On, Professional installation is always recommended. (1) Brand new in original box, never been tried on & used. (2) Exactly same as picture. (3) The Bumper is manufactured out of 3/16 cold rolled steel, and comes standard two solid D-ring mounts that are welded on the inside and out for maximum strength. (4) Built in safety catch for those uneven parking situations. (5) Winch plate:24 X 7. (6) Durable steel construction 2″ X 120″ wall. (7) Extra protection and security. (8) Customize crews designed specifically for your vehicle. (9) Installation instruction is not included. (10) Professional installation is recommended. 1 Front Bumper 1 set of Bolts. Customer ordering error, changed mind, etc. Exchanges will be made after our return center receives and inspects the merchandise. We holp you have a good purchasing experience in our store. Bull bar & bumper. Nerf Bars / Running Boards. 3 Nerf Bars & Running Boards. 4 Nerf Bars & Running Boards. 4 Bent Nerf Bars. 5 Bent Nerf Bars. 6 Nerf Bars & Running Boards. Car Air Tire Pump Inflator Compressor Digital Portable Auto Tire Pressure 12V. 240 pcs Clips Car Truck Push Retainer Pin Rivet Trim Clip Panel Fasteners Kit. 4 Pack T15 CANBUS 4014 3030 Error Free LED Reverse Back Lights Bulbs 6000K White. 100 Pcs Car Retainer Clips Auto Plastic Fasteners Kit Push Trim Pin Rivet Bumper. 99-18 Chevy Silverado 1500 2500 Extended Cab 4 Black Nerf Bars Side Step Boards.
Textured Black Front Bumper with LED light Fit for 2010-2018 Dodge RAM 2500/3500
Texture Front Bumper with Winch Plate + LED lights for 97-06 Jeep Wrangler TJ. Black Full Width Front Bumper w/ 4x20W LED Lights For 07-21 Jeep Wrangler JK/JL. [Material]: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel pipe make the bumper more durable. The surface is also coated with black powder to form a black texture and is more resistant to corrosion. [Volume and weight]: Weight. 49.6X20.9X15.4 (inches). [Package included]: Front bumper + 2X18W and 2X20W aluminum alloy LED lights +1X144W LED light+ 2X4.75T D-rings +washer+ screws+ installation instructions. No cutting or drilling is required. You can fix it directly with screws. Vijay brand bumpers are manufactured through a complete manufacturing process. Every step has a strict control by professionals. Due to the overweight bumper package, this product does not include the front bumper two D-rings, if you need, Please contact me to send you two D-rings for free. Our factory has been in operation for 16 years, with professional technicians and professional engineers to control product quality and design. Manufacturing Process Manufacturing:1. Hit the sand 7. We will respone ASAP. Customer service is very important to us, hope you can enjoy our store. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Bumpers & Components\Bumpers & Reinforcements”. The seller is “ronghui06″ and is located in this country: US. This item can be shipped to United States.
- Material: Steel
- Type: bumper
- Features: Mounting Hardware Included
- Color: Black
- Manufacturer Part Number: RAM25-QG01
- Finish: Textured
- Placement on Vehicle: Front
- Brand: Vijay
- Manufacturer Warranty: 3 Year
- UPC: 783971518872
3D Carbon Fiber Matte Textured Vinyl Wrap Sticker Decal Air Release Bubble Free
3D Carbon Fiber Matte Textured Vinyl Wrap Sticker Decal Air Release Bubble Free. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Decals & Vinyls”. The seller is “ezauto-wrap” and is located in this country: US. This item can be shipped to United States.
- Color: Black
- Size: 600\
- Brand: EZAUTOWRAP
- Manufacturer Part Number: 3D CARBON FIBER-VINYL
- Theme: 3D Carbon Fiber Matte
- Placement on Vehicle: Left, Right, Front, Rear
- Finish: 3D Carbon Fiber Matte
- Adhesive Type: Self Adhesive Peel and Stick
- Thickness: 3Mil