Category Archives: steel
Steel Front Bumper Fit For 2007-2010 Chevrolet Silverado 2500 3500 HD withD-Rings
The Bumper will be Sent to You in 2 Packages. Condition : 100% Brand New. Color : Black(As Pictures). Number of Pieces: 1 Set(2 Packages). Placement on Vehicle: Front. D-Ring Capacity: 4.75 ton. Mounting Style: Screw Mounting. Type: Front Bumper Split design. Fitment Type: Direct Replacement. Items Included: Mounting Hardwares. Package Note:You Will Receive 2 Package. Features: Durable; No Drilling Required; Scratch-resistant. Nice Looking, Eexclusive Design. Front Bumpers are Exclusively Distributed and Designed Separately, which not only make Your Car Nice, but also is Easy to Replace when some of the Bumpers’ Parts are Damaged. Duty Carbon Steel and Painting Surface 3mm. Make our Bumper more Corrosion-resistant and Durable. The Built-in Winch Plate for up to. Capacity D-rings are Helpful and High load-bearing when Installing. Our bumper Includes the Paper Instruction and are Engineered to be a Direct Bolt-on Upgrade Using just Basic Hand Tools, so there is No Drilling or Cutting Required for a Clean Straight Forward Installation. The shackle is not designed for towing and recovery, please refer to the owner’s manual for towing and rescue information; 2. Overload is NOT included in after-sales service. 1x body Q235 Carbon Steel. Head bolts: M6 14 pieces. Hexagonal nut: M6 14 pieces. Spring washer:? 6 14. Flat washer: M6 28 pieces. Hexagonal head bolt: M8 12 pieces. Hexagonal nut: M8 12 pieces. Spring washer:? 8 12. Flat washer: M8 24 pieces. Hexagonal head bolts: M12 6 pieces. Spring washer:? 12 6. Flat washer: M12 12 pieces. Hexagonal nut: M12 6 pieces. The black powder-coated surface (120 microns thick) and premium E-coating process have excellent strength and stiffness, as well as long-lasting durability and corrosion resistance, which can be protected for more than 5 years in normal use. 3-piece modular design front bumper features rugged styling. Welded hoop protects the front of the car in collisions.
Steel Rear Bumper Fit For 2022-2024 Toyota Tundra withLED Lights & D-rings
W/LED Lights & D-rings. WITH 2 x LED Lights &. Condition : 100% Brand New. Color : Black(As Pictures). Number of Pieces: 1 Set. Placement on Vehicle: Rear. Mounting Style: Screw Mounting. Fitment Type: Direct Replacement. Items Included: Mounting Hardwares. Durable; No Drilling Required. Nice Looking, Eexclusive Design. Bumpers are Exclusively Distributed and Designed Separately, which not only make Your Car Nice, but also is Easy to Replace when some of the Bumpers’ Parts are Damaged. Duty Carbon Steel and Painting Surface 3mm. Make our Bumper more Corrosion-resistant and Durable. Our Rear Bumper is decorated with two LED-lights. 4.75T High-Strength D-ring. Rear bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper to achieve maximum strength. Our bumper Includes the Paper Instruction and are Engineered to be a Direct Bolt-on Upgrade Using just Basic Hand Tools, so there is No Drilling or Cutting Required for a Clean Straight Forward Installation. The shackle is not designed for towing and recovery, please refer to the owner’s manual for towing and rescue information; 2. Overload is NOT included in after-sales service. The black powder-coated surface (120 microns thick) and premium E-coating process have excellent strength and stiffness, as well as long-lasting durability and corrosion resistance, which can be protected for more than 5 years in normal use. Modular design bumper features rugged styling. Welded hoop protects the rear of the car in collisions. To Protect yourself / To Avoid collisions that can causeirreparable damage to your car / To Enhanced Oft-Roading Performance.
Steel Carbon fiber Front Fog Light Lamp Frame cover 4X For BMW X6 M50i 2020-2022
Because the same model car may be differently produced in different country. The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing! Condition: 100% Brand New. Color: Same as in the pictures. Made in an ISO 9001 facility to ensure good quality. Easy installed and No modification needed, double side Automotive tape at the back. This item doesn’t come with manual installation. Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc). Please ensure that the product completely fits before proceeding with installation. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting. Carefully place the product in desired location and press down for about 1-2 minutes, Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours. The installation is complete. International Buyers – Please Note. We understand that sometimes an item may not turn out to be just what you need. DO NOT send without communication. We open Monday to Saturday. We answer every message within 24 hour period. Our customer service representative is here to ensure that you are satisfied with our services. So yourPOSITIVE FEEDBACK is very important. Thank you so much. And welcome back to our store again. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “perfect-trim” and is located in this country: CN. This item can be shipped worldwide.
- Number of Pieces: 4
- Color: Black Carbon fiber
- Manufacturer Part Number: For BMW X6 G06 2020-2022
- Material: Stainless Steel
- Vintage Part: No
- Placement on Vehicle: Front, Left, Right
- Brand: Unbranded
- Type: Body Side
- OE/OEM Part Number: For BMW X6 G06 2020-2022 Black
- Manufacturer Warranty: 1 Year
- Attachment Type: Adhesive
- Features: Easy Installation
- Country/Region of Manufacture: China
- Universal Fitment: No
- Finish: Polished
Steel Carbon Fiber Rear Door Trunk Lid Tailgate Strip 1pc For Cadillac CT5 20-22
Steel Carbon Fiber Rear Door Trunk Lid Tailgate Strip 1pc For Cadillac CT5 20-22. Number of Pieces Include: 1pcs. Product Material: Made of high quality Stainless Steel material. Product Color: As The Picture Shows. Made in ISO9001 factory, good quality and have been exported all over the world. Strict factory QC test, high quality guarantee. APPLICATION–Provide a premium and stylish decor for your car, cover existing scratches and decorate your car. FEATURES–Made of use superb surface treatment technology for protection, anti-corrosion, fading protection and years of trouble-free use. DESIGN–Perfectly match with your original car. It can bring luxurious decoration upgrades to your car. Simple installation, direct installation without any modification, Perfectly match your vehicles. First check the area or location on the vehicle where this product needs to be installed. Please have the surface complete clean. Please use a cleaning towel to remove any dirt, dust and make sure the surface is thoroughly clean and completely dry. Compare the position and adjust it, Install the product in the correct position of the vehicle and check if it is stable. If you not familar with DIY, please ask professional for help. Please check whether this item can fit on your car before purchasing. Because of the different time zone, please give us some time, all the emails will be answered within 12 hours. We will provide you with the most satisfactory solution. We will be glad to work together and provide a satisfying solution. We can provide you with value discounts and more efficient and faster transportation. In the event that you receive the item is not in the standards above. Good communication helps buyers and sellers to solve any problems. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Body Moldings & Trims”. The seller is “auto_motors-ef4t” and is located in this country: CN. This item can be shipped worldwide.
- Attachment Type: Self-Adhesive
- Brand: RYJOXZS
- Color: Black
- Country/Region of Manufacture: China
- Features: Easy Installation, Heat Resistant, No Drilling Required, Self-Adhesive, Waterproof
- Finish: Textured
- Manufacturer Part Number: Fit For Cadillac CT5 2020-2022
- Manufacturer Warranty: 1 Year
- Material: Stainless Steel
- Number of Pieces: 1
- Other Part Number: Fit For Cadillac CT5 2020-2022 Exterior
- Performance Part: Yes
- Placement on Vehicle: Rear
- Type: Tailgate
- Universal Fitment: No
- Vintage Car Part: No
- Vintage Part: No