Category Archives: frontrear

Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010

Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010

Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010
High Performance Full Brake Kit. Zinc Coated Drilled and Slotted Brake Rotor + High Performance Ceramic Pads. This Brake Kit Includes. Zinc Brake Rotors: 4pc Ceramic Brake Pads: 8pc —Free Hardware Kit Included. Our Zinc-Coated Rotors feature precision-drilled holes to help lower temperatures during extreme driving conditions. These Slots help achieve safe and smooth braking by wiping away gas or debris to maintain clean contact with the rotor surface. Zinc coating is equally applied over the whole rotor (inside and out), making them ready to install out of the box with no oil to remove. This zinc coating provides long-lasting protection against corrosion and rusting, helping to maintain the rotors appearance, and extend rotor life. Ceramic brake pads are quieter than semi-metallic pads. Under most conditions, they emit little or no sound when the brakes are applied. APF Ceramic Brake Pads combine impressive stopping power with everyday drivability. Ceramic pads are excellent at dispersing heat, helping them deliver consistent performance under a wide range of temperature conditions. Our Zinc Rotors are machined and mill-balanced with a maximum rotor run-out of 0.0032 inches; (0.08mm) and a maximum DTV tolerance specification of 0.0005 inches (0.0125mm). With this precision fine-tuning, performance is guaranteed. Manufacturers defects do not include abnormal operation, damage caused by accidents, cosmetic damages, damage due to negligence, improper installation, damage caused by improper service, damage due to lack of maintenance, noise, normal wear and tear, pitting, rusting, damage from track racing, or damage to zinc plating. Note: Pictures of Brake Rotors, Brake Pads, or packaging may differ from actual product/packaging received. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “apfparts” and is located in this country: US. This item can be shipped to United States.
  • Brand: APF – All Performance Friction
  • Manufacturer Part Number: ZFK100066
  • Placement on Vehicle: Front, Rear,Right,Left
  • Rotor Style: Drill and Slotted
  • Pad Material: High Performance Carbon Ceramic
  • Fitment Type: Direct Replacement
  • Solid or Vented Rotor: Vented
  • Manufacturer Warranty: 1 Year
  • Mounting Hardware Included: Yes – Hardware included
  • Surface Finish: Zinc Coated
  • Custom Bundle: Slotted and Drilled Rotors/Ceramic Brake Pads/Hardware included
  • Bundle Description: Everything needed for a Direct Replacement of your OEM Rotors
  • Performance Part: Yes
  • Material: Cast Iron
  • Lug or Bolt Hole Quantity – Front: 5
  • Lug or Bolt Hole Quantity – Rear: 5
  • Type: Brake Disc Rotor

Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Acura TSX 2009-2010

Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150

Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150

Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150
FITS THE FOLLOWING VEHICLES. Fits: Ford F-150 2012 – 2014 6 Lug Models ONLY Fits: Ford F-150 2015 – 2018 Models With Manual Parking Brake Fits: Ford F-150 Raptor 4WD 2012 – 2014 Fits: Ford F-150 Raptor 4WD 2017 – 2018 Models With Manual Parking Brake. JOIN THOUSANDS OF OUR HIGHLY SATISFIED CUSTOMERS. Please read all fitment information provided above to verify your vehicle has the correct parts. All rotors are precision machined for exact OEM In-stock replacement. Please don’t forget to read proper fitment information listed in the check vehicle fits section listed above for your vehicles correct parts. Our Brakemotive brake pads are only included in applicable listings. Please always check the “What’s Included” section for more information regarding BrakeMotive quality brake pads. Compared to competitors our pads are unmatched in the market. HIGHEST QUALITY VALUE FOR YOUR BUCK. The BrakeMotive brake pads are of highest quality and prevent frequent issues as well as maintenance. This includes issues such as dust, rim coloration, and the overall life expectancy of your brake related parts. Best non-ferrous compound (Non-Metal) for fast break-in. More Quiet braking power. CARBON CERAMIC: BRAKE PAD FORMULA. Made from original equipment spec’s. RUB YOUR FINGER, IS IT DUSTY? Sign of poor noise insulation. CERAMIC: FEEL THE EDGES, SEE THE COLOR? Harsh metal compound (Ferrous) means slow break-in and more dust. Single layer metal shim means more noise & uneven caliper connection. Kinetic rotors are designed for optimum rotor cooling and durability with one cooling hole per vane. This also provides superior strength to avoid cracking. This insures that the hottest part of the rotor gets cooled. The fact is that the drill holes greatly improve convection heat transfer and the result is more brake pad bite. LEADING IN VALUE AND PERFORMANCE. Cross-drilled rotors keep the brakes up to 150 degress cooler to prevent rotor warping. Therefore your pads last even longer and your rotors still look good. ACTUAL SILVER ZINC PLATING. Electro-Chemical Zinc Plating is the best way to protect metal from rust. Some brands use a light oil / grease film coating over the rotors. HI-DENSE CERAMIC CARBON COMPOUND. Brakemotive auto-parts is now providing carbon ceramic brakes. These Carbon Brake pads are designed for scenarios that require high stopping power. BEST QUALITY IN BRAKES. Why choose carbon fiber? For instance, brake pads developed with carbon fiber can ensure a mess free clean rim and tire. Reason’s why is because the carbon fiber in these pads are tougher than the typically compound found in ceramic pads, which allows the rotor to wear slower and more evenly, preventing constant wheel checks and repairs. The Carbon fiber brake pads are equipped with a premium backing plate. This included a powder coating to withstand rust/corrosion and extreme temperatures. Always check you vehicles fitment information before proceeding with your order. This will allow your business with us to be very progressive! Created to prevent rust and corrosion each brake pad is equipped with a powder coated backing plate. THERMAL SCORCHED FOR FAST BREAK-IN. Carbon Ceramic brake Pads have been thermal scorched to offer superior resistance for a clean rotor surface wear. CARBON + CERAMIC BRAKE PAD COMPOUND. Brakemotive brake pads are formulated with a new high quality carbon fiber material. These pads last longer than typical pads & a cleaner resistance to rotor metal. OE CHAMFERED & SLOTTED. Factory standards chamfered and slotted carbon ceramic brake pads to ensure a truly quiet braking experience. FOLLOW STEPS FOR PROPER BREAK-IN. The break-in procedure is critical to superior braking performance. A proper break-in is to establish an even layer of friction material deposited on the rotors from the brake pads. Break-in new brake pads/rotors using the pad bedding procedure as follows. Proper Pad bedding can prevent rotor warping. Do not come to a complete stop. The brakes to cool. Before the brakes cool. Expect a smell of resin as brakes are hot. With moderate brake use, allowing the heated brakes to. LONG LASTING HIGH QUALITY ROTORS. Cross-drilled rotors can improve stopping power up to 35% over stock rotors as reported in SAE Technical Paper 2006-01-0691. The effect of rotors cross-drilled brake performance. That is why Corvette, Porsche. Mercedes and BMW vehicles come with factory direct with drilled and slotted rotors, i. Not dimpled or slotted. High rotor temperature can cause heat spots to form in the rotor, and this causes pulsating brakes. Cross-drilled rotors keep the brakes up to 150 degrees cooler to prevent rotor warping. OPTIMUM COOLING / DURABILITY. WARNING:This product can expose you to chemicals including Chromium (hexavalent compounds) and Nickel (Metallic), which are known to the State of California to cause cancer, and Chromium (hexavalent compounds) which is known to the State of California to cause birth defects or other reproductive harm. ROUNDED SLOTS ARE BETTER! Every slot is chamfered for a smooth linear transition at the edge. Electro-chemical plating is the best way to protect metal from rust. Some brands use painted rotors that peel or discolor when the rotors get hot. Zinc Plating Does Not Apply To Hub and Rotor Assemblies! Please see item specifics above for details on surface finish. DRILL HOLES PREVENT ROTOR WARPING. Drill holes allow air to flow over and through the vanes to improve convection heat transfer and keep the rotors up to 150 degrees cooler. Our premium rotors are designed with several cooling vanes that keep the rotor from long term negative effects such as warping. PREVENT ROTOR & CALIPER DAMAGE. Customers who choose BrakeMotive, experience cleaner wheels, and easy “Brake-pad-swap-out” Try BrakeMotive for performance brake parts. Most vehicles (hardware included if applicable). PERFORMANCE KITS ARE THE WAY TO GO. Brakemotive parts = High Performance! /// front & rear kits = one time job experience! Each of our Brake Motive products are 100% certified and tested to insure product satisfaction. In the following charts we have listed our premium brake pads in a carefully analyzed testing procedure over a period of 1430 typical foot to pedal braking stops. Our Brake Pads offer sustainable braking power, that has been performance tested to withstand harsh braking environments. Our Ceramic and metallic brake pads are leading in the market providing long lasting quality brakes. BRAKEMOTIVE LEADS IN PERFORMANCE. Our Kinetic ceramic brake pads are top quality for performance and customer expectations for not only our brand leading performing brakes, but an enduring quiet and more smooth riding experience. Brakemotive is one of the largest brake supplier in North America, with over 350,000 satisfied customers. We only sell premium performance brake kits to assure the very best quality. Because of our large volume, we can offer steep price discounts. In most cases, the delivered price of our perfomance rotor and ceramic brake pad kits is at or below the cost of equivalent plain rotors and brake pads from your neighborhood retail store. Experienced engineering team uses advanced CAD (computer aided design) software to configure the rotor drill holes and slots for best optimum braking. We machine the rotors with state-of-the-art CNC (computer numerical controlled) machines in our mid-west plant with strict quality control. We guarantee a perfect fit to your vehicle, but please check the part fitments information in this listing before your order. The Brakemotive team members are available to answer your questions Monday through Friday from 8:30am CST to 6:00pm CST and Saturday from 9:30am CST to 4:30pm CST. If you can’t find the parts for your vehicle, just give us a call. Brakemotive it our responsibility to keep our customers 100% satisfied. PERFORMANCE KITS FRONT + REAR. At Brakemotive replacement parts are always in stock. Brakemotive is one of the largest brake suppliers in North America, with over 350,000 satisfied customers. Not to worry, your order will still get to you quickly and efficiently! Additional charges may be incurred for international callers, please contact your provider for more details. Times vary by country. INTERNATIONAL BUYERS ARE NOT ELIGBLE FOR THE CALIPER CORE RETURN PROGRAM. ALL PARTS MADE TO U. How many brake pads are in a “set”? On listings for front or rear only, one set refers to four individual brake pads, enough for the entire front or rear axle of the vehicle. Front and rear kit listings come with eight individual brake pads, enough for all four wheels of the vehicle. Is the brake rotor picture the same as the rotor I will receive? The photo in the listing is a generic representation of the item you will receive. With over 1700 different part numbers, it is not possible for us to post unique pictures for each application due to graphic storage space limitations. Are any modifications necessary to make these rotors fit my vehicle? No modifications or alterations are needed in order to install our brakes. All parts are designed to be direct original equipment replacement parts with simple bolt-on installation. Metallic Vs Ceramic Brake Pads? Ceramic pads are quieter, however, metallic pads are more appropriate from constant tough braking like trucking, hauling, intense highway driving or racing. Will I get Tracking Information? Are the drilled holes and slots directional? Yes, the rotors are machined based on their orientation on the vehicle. Driver’s side (left) and passenger’s side(right) have unique patterns so the slot trails toward the back of the vehicle. What causes rotor warping? Rotor warping is cause from lack of maintenance to a vehicle rotors brakes calipers, and other braking components. Do I have solid rotors or vented rotors? Solid rotors usually contain a single thin solid metal braking surface. Vented rotors have vents/vanes between two solid rotor surfaces. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “brakemotive76″ and is located in this country: US. This item can be shipped to United States, Canada.
  • Brand: Brakemotive
  • Placement on Vehicle: Front, Rear, Left, Right
  • Rotor Style: Drilled, Slotted
  • Material: Cast Iron
  • Type: Brake Disc Rotor
  • Manufacturer Part Number: BMT5235908508
  • Manufacturer Warranty: 10 Years
  • Interchange Part Number: xl king ranch ssv fx2 limited harley-davidson, edition raptor svt raptor tremor, xlt platinum fx4 lariat stx 2.7l 3.5l 3.7l 5.0l, 6.2l, disc brakes rotor pads, drilled Slotted, drilled and slotted brake rotor ceramic brake pad, 2014 2015 2016
  • Brake Pad Compound: Carbon Fiber Ceramic Formula
  • Front Lug / Bolt Circle: 6 x 135mm
  • Front Rotor Size (inch): 13.78
  • Front Rotor Weight (Lb p/rotor): 30.1
  • Images: Images Are Examples, Product (Pad Color) May Vary.
  • Lug Count: 6
  • Other Part Number: brake discs
  • Rear Lug / Bolt Circle: 6 x 135mm
  • Rear Rotor Size (inch): 13.7
  • Rear Rotor Weight (Lb p/rotor): 25.26
  • Solid Or Vented Front Rotor: VENTED
  • Solid Or Vented Rear Rotor: VENTED
  • Surface Finish: Silver Zinc Dichromate
  • Year Range: 12;13;14;15;16;17

Front+Rear Brake Rotors & Carbon Ceramic Pads For 2012 2013 2014- 2017 Ford F150