Tag Archives: black
Next page →
Hydro-Dip Carbon Fiber Finish (see Photo). Red center strip on Top. Perforated Black leather on Left/Right handle. 100% Brand new item. WHAT’S IN PACKAGE. 1 x STEERING WHEEL. (Steering wheel only, No other parts included) (Swap your original parts from your wheel, including airbag, trim, and bottoms). Installation instruction is not included. Professional installer is recommended. 48 states w/ physical addresses only. Usual transit time is 3-14 days, depends on destination. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Steering Wheels & Horn Buttons”. The seller is “a1_auto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: Leather
- Type: Steering Wheel
- Surface Finish: Hydro Dip Carbon Fiber
- Fitment Type: Direct Replacement
- Color: Black
- Brand: REVESOL
- Items Included: Steering Wheel
Hand Forged Carbon Steel Black Japanese Wakizashi And Katana Samurai Sword Sets. Overall Length:103cm / 40.6 inch. Blade Material:1095High Carbon Steel. Nagasa Length:73cm / 28.7 inch. Handle Material:Genuine Ray skin + Hard wooden. Handle Length:27.00cm / 10.6 inch. Saya Material:High quality wood. Kasane(thickness at habaki) :7.0mm. Tsuba Material:High quality alloy Tsuba. Sakihaba(width near yokote)2.8 cm. Sakikasane(thickness at yokote):3mm. Overall Length: 30.7 inch / 78.0 cm. Nagasa Length: 29.7 inch / 50.0 cm. Handle Length: 7.8Inch / 20 Cm. Notice: Due to our swords are full hand made, so Specs will varyslightly from sword to sword. The balde was made of 1095 High Carbon Steel in Maru structure, it was Fully hand forged, hand shaping, hand polishing in the most traditional method of sword making. The blade was well heat treating (Refining) and quenching(Tempering) greatly improve the hardness and flexibility of the balde for real use. The blade comes with a full length Tang greatly enhances the strength of the sword while swung and it will be signed according to your requirements. Tsuka(Sword handle):The Tsuka is made of high quality wood wrapped with genuine ray skin(Samegawa), and tightly tied with real silk ITO. Two Mekugi (peg) was nailed to secure the full tang of the sword, the sword can be disassembled by picking up the two Mekugi (peg). Tsuba sets(sword Guard):The Tsuba (guard), Fuchi (sleeve) and Kashira (buttcap) are made of high quality alloy with exquisite workmanship and fine elaboration. The tsuba is Secured by Two Copper Seppas (Spacer), The Fuchi (sleeve) and Kashira (buttcap) are made well match the tsuka for a good balance. Habaki&Seppa:The habaki(blade collar) and the seppas (Spacer) are made of high quality brass. Saya(Sword Scabbard):The saya is made by dry wood and put them through hacking, slotting, gluing, polishing and shaping treatment, and design proper degree of tightness for the sword blade to enter and out. 1-A free&random sword bag comes with the sword. 2-The display stand is NOT included. 3-Due to All of our products are full handmade, So the specification varies a little from sword to sword. This item is in the category “Collectibles\Knives, Swords & Blades\Swords & Sabers\Asian\Japanese”. The seller is “shadowless-sword-211″ and is located in this country: CN. This item can be shipped worldwide.
- Country/Region of Manufacture: China
- Blade Material: 1095High Carbon Steel
- Style: Japanese
- Dexterity: Ambidextrous
- Theme: Samurai
- Original/Reproduction: Original
- Type: Katana
- Edge: Single, Curved
- Color: Black
- Handle Material: Genuine Ray skin + Hard wooden
- Handedness: Double-Handed
- Tang: Full
Black PU Leather Sheath Japanese Samurai Katana Sword Carbon Steel Shiny Blade. Were one of the traditionally made Japanese swords (nihonto) that were used by the samurai of ancient and feudal Japan. The katana is characterized by its distinctive appearance: a curved, single-edged blade with a circular or squared guard and long grip to accommodate two hands. Samurai katana as a weapon is famous for its beautiful shape. They are used as art collection and the symbol of samurai soul. Our sword allows you to make a collection or to send to friends as a present. The blade of this sword is made of high. The high-performance blade has very good toughness and does not deform when bent at 90 degrees. The hardness is as high as 55. Cutting the wire does not hurt the blade. It can be used in battle or for display. We would highly recommend it as a gift. Anyone would be thrilled to receive a gorgeous sword as a gift! OVERALL LENGTH: 103 cm / 40.5 inch BLADE LENGTH: 70 cm / 27.6 inch TSUKA LENGTH: 26 cm / 10.24 inch BLADE WIDTH: 3.2 cm / 1.26 inch BLADE THICKNESS: 0.7 cm / 0.28 BLADE CRAFT: fully hand forged, water quenching BLADE MATERIAL: high carbon steel BLADE SHAPE: Shinogidukuri NAKAGO: full tang KISSAKI: medium (chukissaki). TSUKA(HANDLE): hard wood core, Hineri maki MEKUGI: 2 bamboo pegs TSUKA-ITO: black synthetic silk wrapping cord SAMEGAWA: white imitated rayskin FUCHI / KASHIRA / MENUKI: alloy TSUBA(HAND GUARD): alloy HABAKi & SEPPA: brass SAYA: PU leather wrapped wooden scabbard. 1 sword with saya. (No display stand and other fittings along with). If you don’t like the original mountings, you can choose the favorite ones from the options. Handle wrapping cord and saya cord should be the same color. If you only want to change one of them to another color, please inform of it specially. We can engrave English words, Chinese Characters on the blade for free. We can add or remove the machine-made wavy hamon for free. Usually thought be used for bloodletting only. It is also used to lighten the weight of the sword. We can add or remove Bo-hi for free. Most of our blades are sharp. We can also make the blade unsharpened for free if you require. The price varies from different swords. International Buyers – Please Note. Please contact with us before you leave feedback. We will try our best to solve the problem for you, thank you. Sometimes, you may not get our reply immediately due to the time difference among each country. However, please be assured that we’ll strive to reply you as soon as possible once we got your messages. This item is in the category “Collectibles\Knives, Swords & Blades\Swords & Sabers\Asian\Japanese”. The seller is “swords001″ and is located in this country: CN. This item can be shipped worldwide.
- Blade Material: Carbon Steel
- Dexterity: Ambidextrous
- Theme: Samurai
- Original/Reproduction: Original
- Type: Katana
- Style: Japanese
- Edge: sharp, Curved
- Handle Material: Cord Wrapped
- Handedness: Double-Handed
- Tang: Full
- Brand: SJ SHI JIAN
- Color: Black
- Country/Region of Manufacture: China
Forged Gloss Black Car Vinyl Wrap Air Release Bubble Free Sticker Sheet Film DIY. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Decals & Vinyls”. The seller is “ezauto-wrap” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Sizes: 60\
- ebay店铺第一分类: Carbon Fiber
- Brand: EZAUTOWRAP
- Manufacturer Part Number: FORGED G-BLACK-10012
- Type: Vinyl Wrap
- Theme: Forged Gloss
- Color: Black
- Finish: Forged Gloss
- Placement on Vehicle: Left, Right, Front, Rear, Upper
- Features: Bubble Free Air Release Channel
- Fit for: Dash Trim Kit Console Grille Trunk Door 7D 6D 5D 4D 3D
- Work For: Spoiler Bumper Roof Hood
- Adhesive Type: Low – Medium Tack
- Thickness: 3Mil
- Basic Wrapping Tool Kit: Felt Squeegee / Utility Knife
- Deluxe Wrapping Tool Kit: Squeegee / Knife / Glove / Pry Tool / Adhesion Promoter
This slide uses a 9mm /. 38 Super 0.065 Firing pin. Brand New, High Quality 1911 Slide. Series 70 or 80. Bead Blasted for a Matte Non-Reflective Surface. Commander Length / for 4.25 Barrel with Bushing. To see if there are more pictures, push on the little blue arrow > to the right of the pictures. If there is no little blue arrow >, then there are no more pictures. All of the parts we receive are factory original parts. For example we might have parts marked Colt, Springfield, Smith & Wesson, Remington, Lone Wolf, FN, Sig Sauer, CZ, Springfield, etc. Or, we might receive the parts before the stamp is applied. Most of our parts are excess inventory that these companies overproduced because they overestimated how many guns they would sell. For example, we might have them make a barrel longer with porting, or apply a different colored finish, or custom cut a slide for a better appearance, etc. In any case, our parts are all top notch parts that you would expect to get in a brand new gun. The nature of this business model has plusses and minuses. The plusses are you get top quality original parts for less than you would pay otherwise. Obtaining most of our products is hit and miss. Some items are produced enough that we can get more relatively easily, but others depend on if there was overstock accidentally produced. SALES TO UNITED STATES ONLY. All firearms parts should be inspected and installed by a competent gunsmith. The illegality or unenforceability of any provision of these Terms of Use shall not affect the validity and enforceability of any legal and enforceable provisions of these terms and policies. We have taken reasonable efforts to ensure that the information contained is accurate; however, all information is provided “as is” without any express or implied warranties, including but not limited to the implied warranties of merchantability, fitness for a particular purpose or non-infringement. In addition, by using the information from the listing, you understand and agree that all firearms are potentially dangerous if handled improperly and can pose risks and hazards to yourself and others, which may result in property damage, serious injury or death. This item is in the category “Sporting Goods\Hunting\Gun Parts\Pistol Parts”. The seller is “spectresupply2″ and is located in this country: US. This item can be shipped to United States.
- For Gun Make: 1911 1911A1 & Clones
- Custom Bundle: No
- Material: 4140 Carbon Steel
- Type: Slide
- Modified Item: No
- For Gun Type: Handgun
- Non-Domestic Product: No
- Material/Finish: Black Melonite QPQ
- Brand: Remington / Para Ordnance
- Gauge/Caliber: .45 ACP
Hiwowsport Carbon Fiber Steering Wheel Jet Style 320mm 6 Holes 1.75 Deep Black. Steering wheels are the first revenue transforming your driving or racing skills to the vehicle. Most factory OE steering wheels are 380mm in diameter. By switching to a smaller sports wheel, the driver is able to make the same turns with smaller effort due to increased leverage. Perfectly transmitting the power, emotions, the excitement, and the thrill of racing from you to your vehicle and vice versa, you would have a full synchronization with your car. Upgrading a Racing Steering Wheel or just the Hub can already give you a brand new driving experience. Our Steering Wheels are also designed to ensure the best grip for a better performance. The Frame is made of Carbon fiber material. 320mm Diameter Dish Racing Spec. Fitment: Fits most cars & vehicles with 6-bolt hub adapter. 13″(320mm) Grip thickness: 1″(25mm) Depth / Dish: 1.75(44mm) Hole: 6. Weights Approximately 1.13 lbs, Light-Weight Design. Horn Button is Retained. 1 × Carbon fiber Steering Wheel. 1 × Carbon fiber Horn Ring. 1 × Installation tool. 1 × Beautiful box. As Shown in Picture Above. Pay for the S&H cost for the replacement. 24 Hours On line. With your support, we will make a progress everyday, we always grow up with you. Now we just launched the B2C department. Feedback: We’d like to give your our best products and service. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problems. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Steering Wheels & Horn Buttons”. The seller is “yingrenguang” and is located in this country: US. This item can be shipped worldwide.
- Performance Part: Yes
- Country/Region of Manufacture: China
- Material: Carbon Fiber
- Type: Steering Wheel+ horn button
- Features: Lightweight
- Color: Black
- Universal Fitment: Yes
- Brand: Hiwowsport
- Manufacturer Warranty: 3 Years
- Items Included: Horn Button, Steering Wheel
- Item Diameter: 320mm
The Pool Cue Shop Is A Direct Authorized Dealer For: McDermott, Meucci, Pechauer, Joss, Viking, Samsara, Kamui, Navigator And More. We Currently Have Over 1800 Cues In Stock. (Anything That Appears To Be A Mark On The Cue In The Photos, Is Simply Glare From Lights) The Pool Cue Shop Is An Authorized Meucci Dealer. NEW 58 Meucci Black Wrapless Cue With Meucci Carbon Fiber Pro Shaft. Forearm: Jet Black Maple Forearm. Joint Pin: 5/16-18 Pin. Jet Black Maple No Wrap Handle. Butt Sleeve: Jet Black Maple Butt Sleeve. Butt Plate: Black Shock Resistant Urethane Butt Plate With Meucci Logo. Butt Bumper: Classic Push In Rubber Bumper. Shaft: 11.85mm, 29 Meucci Carbon Fiber Pro Shaft. Tip: 11.85 Ultra Skin Medium Tip. Standard Or We Can Adjust The Weight To Your Liking 18-21 oz. WE WANT YOUR BUSINESS. Remember To Save THE POOL CUE SHOP To Your Favorites So You’re The First To See Our New Listings. This item is in the category “Sporting Goods\Indoor Games\Billiards\Cues”. The seller is “thepoolcueshop” and is located in this country: US. This item can be shipped to United States.
- Model: EB-NW-CP, Carbon Pro Shaft
- Country/Region of Manufacture: United States
- Custom Bundle: No
- Length: 58\
- Cue Type: Two-Piece
- Brand: Meucci Cues
- Weight: 18 – 21 oz
- UPC: NA
Next page →