Tag Archives: fiber
Next page →
← Previous page
Titanium alloy carbon fiber bearing fast opening EDC knife S35VN blade material
Total length: 21.5cm. Handle length: 12.3cm. Handle material: Carbon fiber +TC4 titanium alloy CNC. Blade length: 9.1cm. Blade thickness: 0.4mm. Blade width: 2.2mm. Hardness: 60-61HRC (vacuum oil quenching heat treatment + tempering 2 times). Back clip: TC4 titanium alloy. Weight: 192g (including packaging). Packing: Gift box screw: all screws 420 stainless steel hardness HRC45, full CNC precision machining, built-in bearing ball system. PS: The product is sharp, please keep away from children.
6Pcs Real Carbon Fiber Pillar Panel Cover Fits SXE10 99-05 IS200 IS300 ALTEZZA
Window pillar post trim cover. Real dry carbon fiber material with gloss clear coat finish. Light weight wont tear. NOT VINYL wrap paper material. Cover up old faded plastic. Easy to install without remove parts. Avoid bending if clear coat is hard due to cold climate maybe result crack. Product required to be heated until clear coat reach flexible before install. Best is to place in the sun for about 5 mins till flexible and heated evenly. Or use dryer to make it flexible enough to fit the interior contour. Clean interior surface few times with tooth brush and hot water ensure wax removal for better sticking surface, then wipe / dryer till fully dry before sticking. Press and hold firmly few mins. Check in the few days after installed maintain press hold if come loose due to climate temperature. European cars interior have environmental friendly coating will preventing double side from sticking. This may required to use epoxy glue to secure in place. We are not responsible if double side wont stick to your trim. It is buyers responsibility to prepare or clean the surface before installing. Professional installation is required. Avoid car wash within 48 hours after installed. Do not use wax or clear products to clean will damage to clear coat caused discoloring.
Quad 4out Carbon Fiber Exhaust Tip- 2.5inlet- Pair Of Staggered L&r Angle Cut
CARBON FIBER DECORATED EXHUAST TIPS. COME WITH GLOSSY AND MATTE OPTIONS, STAGGERED AND PARALLEL DESIGNS. FIT MUSTANG, CAMARO, CHALLENGER AND ALL TYPES OF TRUCKS. SELL AS A PAIR. 4IN OUTLET X 2. STAINLESS STEEL INSIDE AND CARBON FIBER OUTSIDE. SLANTED CUT AT OUTLETS. STAGGERED LEFT AND RIGHT SETUP OR PARALLEL DESIGN. INSTALLATION TYPE: CLAMP ON. CHECK MORE OF OUR TREND ING EXHAUST TIPS! CHECK OUR STORE FOR MORE PRODUCTS.
2PCS Glossy Real Carbon Fiber Exhaust Tips For BMW Performance Tail Pipes
Will Fit All E9X / F3X Series. REAL CARBON FIBER // STAINLESS STEEL. 93mm out, 63mm in, 120mm length. IF YOU NEED A DIFFERENT EXHAUST TIP SIZE THEN MESSAGE ME. Thank you for viewing.
Benchmade Bugout 535BK-2 Carbon Fiber Elite Black S30V Blade? Gold Upgrades NIB
New In Box (NIB) Bugout 535BK-2 Carbon Fiber Elite® Handle and Black S30V Blade with Gold Upgrades. Genuine Benchmade Bugout 535BK-2 with a Carbon Fiber Elite® handle and S30V premium stainless steel blade. This folding pocket knife features a drop point blade type with a plain edge and manual opening mechanism. The blade length is 3.24 inches and the handle is made of Carbon Fiber Elite®, which enhances the knife’s durability and grip. This knife is an original Benchmade product, with unique custom gold upgrades that make it stand out from other folding knives. Blade is centered, has smooth drop free action (see video 26-30 sec), tight lockup with no blade play, and the factory edge is very sharp (see video 33-38 sec). Don’t miss out on this awesome beauty! Born on Date on box is 12/28/23. Also includes all original parts that were replaced with gold upgraded parts, see photos. Please see photos/video they are part of the description. ? Custom Built and upgraded with new gold colored Titanium screws and gold titanium thumb stud. ? Also has a gold colored backspacer and pocket clip. All 100% Authentic Benchmade except for the gold upgraded parts and polished washers. Knife was in fantastic conditions! Previous feedback on this knife. Very handsome in appearance and wonderfully smooth in operation. NOTE : All the gold parts are not the exact same shade of gold. Benchmade Bugout AXIS Lock Knife Black CF-EliteT (3.24 Black) 535BK-2. CPM-S30V Premium Stainless Steel (58-60HRC). With a black finish. Double thumb stud opener that can be used with your right or left hand. Textured Black Molded Cf-EliteT handle/scales over nested steel liners. Safe, strong, and ambidextrous AXIS-Lock mechanism. Reversible pocket clip for tip-up carry. Handle Material: CF Reinforced. Right Hand, Left Hand.
3K Carbon Fiber Sheet Panel Board Plate 400×250 0.2 1.0 2.0 3.0 4.0 5.0 6.020.0
The density of Express Carbon Fiber Board is 1.8g/cm3 and the density of steel is 7.8g/cm3. The density ratio is about 1:4. The strength of general grade carbon fiber is 3500MPa, and the strength of steel is 340MPa, to achieve the same strength of carbon fiber The weight ratio of carbon fiber to steel is about 1:43. Package includes: 1 carbon fiber sheet.
St Style Real Carbon Fiber Nose Grill Grille For 2021-2024 Bmw M3 G80 M4 G82 G83
Fits ALL Following Models. For Model With ACC, Customer Will Need to Cut An Opening On The Lower Bar of the Grill. Drilling and Self-tapping Screws are Required For Installation. 1 Pair Of Real Carbon Fiber Replacement Front Grill (Both Left and Right Side) and Installation Screws. 100% Brand New In Box. Unique Design ST Style Real Dry Carbon Fiber Replacement Front Grill. Real Carbon Fiber Coated With Glossy UV-Resistant Clear Coating. Make Of High Quality. Lightweight Real Carbon Fiber Material. Replacement Grill that Replaces The Original Front Kidney Grill. Pre-Installed With Radar/Sensor Adapter. For Models With ACC System, Customer Will Need to Cut An Opening On The Lower Bar of the Grill In order to Accommodate. Dramatically Improve The Front End Appearance of Your G8X M3/M4. Instruction Not Included, Installation Will Require. Drilling and Use of 3M Tape/Tap-Screws/Zip-Tie. Professional Installation Is Highly Recommended. We are not responsbile for any import duty. However, We can make arrangement to help reduce the import duty. VI, PR, HI, AK, GU and APO address.
1x Carbon Fiber US AC Power Distributor Aluminum Shell 4 /6/8 outlet box chassis
HiFi Power Distributor Chassis Carbon Fiber. The heavy aluminm box through the special craft processing security electric conduction, the outer carbon fiber plate covering is not in sole possession of the modelling and the metal sense of reality and the modern feeling! And can resist the EMI electromagnetic wave disturbance, the RFI radio-frequency interference completely, causes a music background tranquiler detail to assume. 100% Brand new, top quality. Aluminum made + carbon fiber plate. Receptacle holes compatible to industrial standard duplex receptacles. 4outlet -Size : W (17cm) X D (10.5cm) X H (5.5cm). 6 outlet:W (23cm) X D (11cm) X H (5.5cm). Weight : 1.8KG. 8 outlet : W. 28.8cm x D(10.7cm) x H(5.5cm) Weight: 2.2KG. Package Contain: 1x chassis box.
3k Carbon Fiber Tube 20mm 21 22mm 23 24mm 25mm 26mm 27mm 28mm 29 30mm 1pc-10pc
With 100% Japan import carbon fiber with EXCELLENT quality. Our tube is roll Carbon fiber tube, not pultrusion tube, roll tube was have the longitude and weft yarn, but pultrusion tube only have the longitude, not weft yarn, so, the strength not as well as roll tubes. Carbon fiber is very light weight, the strength is steel’s 9 times, but weight was about 1/3 of steel! My company Specializing in the production of carbon fiber/Fiberglass tubes which could be widely used in your Product, Whatever Quality or price are all attractive. Thickness : if you want other thickness, and length just let me know, we can do it for you. Surface treatment:3K High Gloss / 3K Matt (black). Features: Very strong and light. Use: Helicopter tail pipe, high-grade fixed-wing connecting tube, multi-rotor arm, tripod, Carbon fiber tube / tubing Etc. You could enjoy more favorable price with larger quantity.
Next page →
← Previous page