Tag Archives: gloss
Next page →
← Previous page
24K Chopped Forged Carbon Fiber Gloss Dark Red Car Vinyl Wrap Sticker Decal Film
24K Chopped Forged Carbon Fiber Gloss Dark Red Car Vinyl Wrap Sticker Decal Film. For smaller size orders, top clear protective film will be peel off to prevent tunneling. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
24K Chopped Forged Carbon Fiber Gloss Blue Car Vinyl Wrap Sticker Decal Sheet
24K Chopped Forged Carbon Fiber Gloss Blue Car Vinyl Wrap Sticker Decal Sheet. For smaller size orders, top clear protective film will be peel off to prevent tunneling. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
7D Carbon Fiber Black High Gloss Auto Vinyl Wrap Sticker Sheet Film Decal DIY 6D
7D Carbon Fiber Black High Gloss Auto Vinyl Wrap Sticker Sheet Film Decal DIY 6D. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Application: from +10°? To +20°? , usage from -30°? To +30°? Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
5D Premium HIGH GLOSS Black Carbon Fiber Vinyl Wrap Bubble Free Air Release
Unique Function Air guide groove: No longer need to worry about the bubble, even if the temperature is very high. Memory repair function: If the vinyl wrinkles up, a hair dryer and a board is enough to smooth it. What’s the difference between 3D, 4D, and 5D? 3D: It has stereo strips on its surface, give people a visual 3D feeling. However, the 3D strips couldn’t perfectly work under dark and strong light environment, and also easy to absorb dust and be broken. 4D: It changes the 3D strips inside the surface, which is a higher technology. This technology solves the dark light problem and makes the strips more stereo under street lamp.
7D Premium Super Gloss Black Carbon Fiber Vinyl Wrap Bubble Free Air Release
This vinyl is designed for vehicle exterior wrap use ONLY. Always pre-test vinyl installation on vehicles. This vinyl is not originally designed for plotter or cutter use. Flexible and Stretchable for concave area.
24K Chopped Forged Carbon Fiber Gloss Silver Car Vinyl Wrap Sticker Decal Sheet
This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl is not originally designed for plotter or cutter use. Type of film: Hybrid vinyl film with air channels(Designed for vehicle exterior with prefect paint condition).
7D Carbon Fiber Black High Gloss Auto Vinyl Wrap Sticker Sheet Film Decal DIY 6D
Automotive Vinyl Wrap Film. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). This vinyl is designed for vehicle exterior wrap use ONLY.
Gloss Real Carbon fiber Engine Bay Side Panel Cover Overlay For Corvette C8 20+
Condition: 100% Brand New. Size: As The Picture Is Shown. 2pcs Engine Bay Side Panel Cover Trim. This Is Aftermarket Replacement Item But Not Genuine. 100% brand new, more original car feeling, made of high-quality , the material in great finished. Provides a high class and fashion decor style, change the ordinary interior and exterior design of the car and add unique colors. Easy installation, It can cover existing scratches and prevent your car from scratch and abrasion, no needs to make any changes, self- adhesive tape on the back, will not easy to fall off. Veay Easy with Double-sided adhesive tape. First pls cleaning surface with alcohol, pour the alcohol over the cloth and wipe it with the cloth, will not damage the original car. Second heat the tape by a hair dryer for better adhesion. Last press it almost 1 minute. Very easy to remove: Pull item by one side, heat the tape by a hair dryer, Slowly wait the tape Stretch, than easy remove by hand. Pleaes feel free let me know, if you are not satisfied with this item. We will reply to you within 24 hours.
ESSMO PET Marble Forged Gloss Carbon Fiber Red Car Vehicle Vinyl Wrap Decal
ESSMO PET Marble Forged Gloss Carbon Fiber Red Car Vehicle Vinyl Wrap Decal. For smaller size orders, top clear protective film will be peel off to prevent tunneling. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. The color of the images shown here may vary depending on your screen settings. For the real representation of the product always check the color swatch or Sample. Check vinyl before use. Partially cut vinyl storage – must remove top clear protective film. If not, it will cause tunneling. Unused roll of vinyl storage – must TIGHTLY (no gap between layers) roll the vinyl and tape up to avoid tunneling. Film: Vinyl, Hybrid Composite Material (Cast / Calendar). Thickness (Face only): 3.7 – 4.1 mil. Thickness (Adhesive): 1.6 mil. Film Type: High-grade polymeric vinyl film. Adhesive: Low-Tack Solvent Acrylic. Protective Liner: PET Liner. Release Liner: PET Liner. Durability: Up to 5 years. Removable: Removable with heat. Storage Period: 3 Years from the Manufactured Date in Temperature Range of 68 F – 78 F (20 C – 26 C) Relative Humidity 50%, Indoor Storage in Original Package. Post-Heat Temperature: 175 F – 185 F (79.5 C – 85 C). Recommended Installation Area Temperature: 70 F – 80 F (24 C – 26.5 C). Comfortability: Flat, simple and moderate compound curves, convex and concave surfaces. Directional: All vinyl films are recommended to be installed directionally. Test the film if non directional installation is desired. Dimensional stability: shrinkage less than 2%. Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt Application Method: Dry Application Only. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D 4D 5D 7D Premium Matte Gloss Semi Black Carbon Fiber Vinyl Wrap Bubble Free
3D 4D 5D 7D Premium Matte Gloss Semi Black Carbon Fiber Vinyl Wrap Bubble Free. 1.100% Brand New (Never Been Used or Installed). Permanent acrylic pressure-sensitive self-adhesive. Easily cleansed with water. Resistant to UV, water, dirt, grease, salt, mild acid and oil. Easy remove without residue. Interior or Exterior of Automobile parts such as. Fenders, Door handles, tire rims, exhaust pipes. Dashboard, Steering wheel, interior door handles, Glove compartments, car control panel, ect. 1x Carbon Fiber Vinyl Sheet. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Product Description: 1.100% Brand New (Never Been Used or Installed) 2. Permanent acrylic pressure-sensitive self-adhesive 3. Stretchable with heat 4. Easily cleansed with water 5. Resistant to UV, water, dirt, grease, salt, mild acid and oil 6. Easy remove without residue Use for: Interior or Exterior of Automobile parts such as: Fenders, Door handles, tire rims, exhaust pipes. Package include: 1x Carbon Fiber Vinyl Sheet.
Next page →
← Previous page