Tag Archives: lights
Full Width Front+Rear Bumpers withWinch Plate & LED Lights Fit Ford F-150 2015-17
Full Width Front+Rear Bumpers w/Winch Plate & LED Lights Fit Ford F-150 2015-17. Aggressive Styling and Excellent Front End Protection. This texured black Front Bumper with stinger hoop offers excellent front end protection. No matter what kind of obstacle you and your Ford F-150 encounter off-road, you can easily fend them off with this heavy-duty front bumper. Its powerful rugged design gives your Tacoma aggresive appearance. Designed for a bolt-on installation, this front bumper is CNC-cut, formed, and MIG/TIG-welded to perfectly fit on your F-150. The provided stinger adds extra protection against forward impacts on steep terrain. E-coat systems can deliver a wide range of lacquer and paint finishes with a combination of state-of-the art performance and decorative effects. The bumpers can last for 100 hours during the salt spray test which is equivalently to have a 5-year corrosion capacity. The product percent of pass reaches 100% after the salt spray test. With the help of the supplied detailed instruction, the procedure is demonstrated step by step to help you finish the installation. You should expect to take up to 2 hours installing this unit, based on your level of mechanical skills. Attempt to complete the operation in your garage and save you a pretty penny ranges from 200 to 500 dollars. 100% Brand new with high guality. Heavy-duty design is to keep your Truck safe even in the dangerous conditions. Manufactured with heavy-duty stainless steel. No drilling or cutting required. Each comes two standard solid D-ring mounts that are welded on the inside and out for maximum strength. Bumper Weight: About 89.29 lbs. 4.75 ton capacity of each d-ring. Textured powder coated surface is good at resisting fade, rust and corrosion. 4X18W Square LED Spotlights. Accommodated with a 20 straight LED light bar(Not Included). High Strength D-Ring Mounts w/ D-Rings Included. Material: High strength carbon steel. Style & Surface-finish: Textured Black. 1x Front Bumper with Sensor Holes. Provides adequate front-end protection. Includes holes for mounting license plate in the middle of the bumper. Pre-formed cut-outs to accommodate factory license plate lights. Includes license plate mounting plane and mounting holes. Pre-cut out for trailer connector. Compatible with factory backup sensors. Included 3/4 inch D-rings which can support up to 9,500 lbs. Rubber D-ring isolators are included. Simple bolt-on Installation w/ detailed instruction. Bumper Weight: About 72 lbs. 2X48W Square LED Spotlights. If you don’t have other address, please contact customer service for consultation before ordering. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. FEEDBACK IS VERY IMPORTANT TO US. Your satisfaction is our primary concern. We are here to help you solve your problems. We work hard for our every customer’s smile and hope to do business with you. Your satisfaction is our No. Our goal is to make sure you are a happy customer and pleasant shopping with us.
Rear Bumper for 2018-2024 Jeep Wrangler JL Unlimited with LED Lights & D-Rings
100% Brand new with high guality. Features a removable license plate mount on the driver side of the bumper. Comes with a license plate light. Heavy-duty design is to keep your Jeep safe even in the dangerous conditions. Manufactured with heavy-duty stainless steel. No drilling or cutting required. Each comes two standard solid D-ring mounts that are welded on the inside and out for maximum strength. 4.75 ton capacity of each d-ring. Textured powder coated surface is good at resisting fade, rust and corrosion. Bumper Weight: 41.01 lbs. Accommodates up to a 33 spare tire. High Strength D-Ring Mounts w/ D-Rings Included. Material: High strength carbon steel. Style & Surface-finish: Textured Black. 1 x Rear Bumper? 1 x License Plate Mount. 1 x License Plate Mounting Light. 2 x 48W LED Spotlights. 1 x Mounting Hardware Kit. 1 x Installation Instruction. Please ensure that the following information is provided when ordering. If you don’t have other address, please contact customer service for consultation before ordering. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. FEEDBACK IS VERY IMPORTANT TO US. Your satisfaction is our primary concern. We are here to help you solve your problems. We work hard for our every customer’s smile and hope to do business with you. Your satisfaction is our No. Our goal is to make sure you are a happy customer and pleasant shopping with us.
For Toyota Tacoma 2005-2015 Front Rear Bumper Steel with LED Lights &Winch D-rings
100% Brand new with high guality. Heavy-duty design is to keep your Jeep safe even in the dangerous conditions. Manufactured with heavy-duty stainless steel. No drilling or cutting required. Each comes two standard solid D-ring mounts that are welded on the inside and out for maximum strength. Bumper Weight: About 127 lbs. 4.75 ton capacity of each d-ring. Textured powder coated surface is good at resisting fade, rust and corrosion. 4X18W Square LED Spotlights. High Strength D-Ring Mounts w/ D-Rings Included. Material: High strength carbon steel. Style & Surface-finish: Textured Black. 1 x Front Bumper. 1 x Winch Plate. 4 × 18w LED Spotlights. Provides adequate front-end protection. Includes holes for mounting license plate in the middle of the bumper. Pre-formed cut-outs to accommodate factory license plate lights. Integrated corner side steps for convenient truck bed access. The left and right grids are available with a red paint job to provide a one-of-a-kind trim style that will set your Tacoma apart from the rest. Works with factory receiver hitches. Included 3/4 inch D-rings which can support up to 9,500 lbs. Rubber D-ring isolators are included. Simple bolt-on Installation w/ detailed instruction. Bumper Weight: About 61.5 lbs. 1 x Rear Bumper. Heavy-duty design is to keep your Tacoma safe even in the dangerous conditions. Front Bumper : 39.812.811.8 inch Weight: 125 lbs. Rear Bumper : 69.114.612.6 inch Weight: 61.51 lbs. 4X 18W LED spotlights. 18W LED spotlights included. 1x Front Bumper or Rear Bumper or Front & Rear Bumpers. This is a multi-attribute listing, you can choose a single front bar or a single rear bar or front and rear bar together. Please ensure that the following information is provided when ordering. If you don’t have other address, please contact customer service for consultation before ordering. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. FEEDBACK IS VERY IMPORTANT TO US. Your satisfaction is our primary concern. We are here to help you solve your problems. We work hard for our every customer’s smile and hope to do business with you. Your satisfaction is our No. Our goal is to make sure you are a happy customer and pleasant shopping with us.
For Jeep Wrangler JK 07-18 Armor Windshield Frame Cover Visor Cowl with LED Lights
For Jeep Wrangler JK 07-18 Armor Windshield Frame Cover Visor Cowl w/ LED Lights. Add extreme wild styling to your Wrangler with a set of TOKMOWIN Windshield Frame Cover. Designed with the combines Roof Visor and Cowl, this armor set features super protection around a-pillow and cowl area. Additional features include an integrated LED lights insert that improves your lighting conditions significantly at night. The heavy-duty design is perfect for off-road adventures. All of this configuration and unique appearance will make your Wrangler stand out among a series of off-road vehicles. This windshield frame cover is CNC-cut, formed, and MIG/TIG-welded to perfectly fit on your Wrangler JK. It is built from heavy-duty 11-gauge and 8-gauge steel to ensure maximum durability. It is coated with a durable black powder coating to ensure lasting protection against corrosion. There is some drilling required for the safe removal of the two metal panels on the cowl. Using a ¼ drill bit, drill out the eight spot welds which fix the side cowl panels. Then install the four brackets around the cowl area. After assembling the other parts to be a set of Windshield Frame Cover, place it around the windshield. Adjust the position of the product carefully. At last, tighten all the bolts. 100% Brand new with high guality. Windshield Frame Cover Amor Set. Combines Roof Visor and Cowl. Aggressive design makes your Wrangler an Armour Style Beast. Added super protection around a-pillow and cowl area. Outer Sun Visor helps shade the eyes of drivers and passengers from the glare of sunlight. Comes with center LED lights insert. Includes 1×100W Strip LED spotlights provides excellent front visibility at night. Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the Vi-cowl main body, 8-gauge(11/64 Inch) for the structure mounting bracket. Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Moderate installation needs some drilling. Product weight: about 71.6 lbs. Windshield Frame Cover Assembly. Style & Surface-finish: Textured Black. 2018 Jeep Wrangler JK JKU. 1 Set of Windshield Frame Cover Amor. 1x 100W LED Spotlights. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. It is important that we know when your return is expected. We need this in case there are any issues during transit. FEEDBACK IS VERY IMPORTANT TO US. Your satisfaction is our primary concern. Welcome to TOKMOWIN, if you like our products, you can follow the store, we will update the new products from time to time! TOKMOWIN is a professional off-road vehicle tuning parts manufacturing factory, providing bumper, front grille, side sill and other series products for JEEP Wrangler Toyota Tacoma and other models. Our product goal is higher quality and cost-effective, and our service concept is that more customers recognize our products. We hope to be liked by more and more customers, so that we can provide you with better quality products in the future, thank you! Our goal is to make sure you are a happy customer and pleasant shopping with us.
Steel Rear Bumper For 2016-2023 Toyota Tacoma with Sensor Hole+2LED Lights D-Ring
HIGH PERFORMANCE MATERIAL? The rear bumper is welded by 3mm high-quality carbon steel. Premium E-coating process and textured black powder coat finish make The wear resistance and corrosion resistance of the rear bumper better, which can be protected for more than 5 years in normal use. ? HEAVY REAR PROTECTION? The Rear Bumper not only can provide excellent protection but also prevent stones and dirt from damaging the rear while walking. ? PERFECT FOR TACOMA USE? Two 4.75 Ton D-Rings shackle mounts are welded into the rear bumper to increased strength. There are 2 additional led work lights to illuminate the road behind, providing safety. The rear bumper also has sensor hole and license plate light holes for the original car. No cutting is required. No drilling is required. Secure directly with screws. And the 2 x 18W LED Lights to greatly increase the enhanced lighting. Applicable to the 2016 2017 2018 2019 2020 2021 2022 2023 Tacoma. 100% Brand new with high guality. Heavy-duty design is to keep your Tacoma safe even in the dangerous conditions. Manufactured with heavy-duty stainless steel. No drilling or cutting required. Each comes two standard solid D-ring mounts that are welded on the inside and out for maximum strength. 4.75 ton capacity of each d-ring. Textured powder coated surface is good at resisting fade, rust and corrosion. High Strength D-Ring Mounts w/ D-Rings Included. Style & Surface-finish: Textured Black. 1x Rear Bumper with Two D-rings. If you don’t have other address, please contact customer service for consultation before ordering. Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. FEEDBACK IS VERY IMPORTANT TO US. Your satisfaction is our primary concern. We are here to help you solve your problems. We work hard for our every customer’s smile and hope to do business with you. Your satisfaction is our No. Our goal is to make sure you are a happy customer and pleasant shopping with us.
Armor Windshield Frame Cover Visor Cowl with LED Lights For Jeep Wrangler JL 18-24
Add extreme wild styling to your Wrangler with a set of Hooke Road Windshield Frame Cover. Designed with the combines Roof Visor and Cowl, this armor set features super protection around a-pillow and cowl area. Additional features include an integrated LED lights insert that improves your lighting conditions significantly at night. The heavy-duty design is perfect for off-road adventures. All of this configuration and unique appearance will make your Wrangler stand out among a series of off-road vehicles. This windshield frame cover is CNC-cut, formed, and MIG/TIG-welded to perfectly fit on your Wrangler JK. It is built from heavy-duty 11-gauge and 8-gauge steel to ensure maximum durability. It is coated with a durable black powder coating to ensure lasting protection against corrosion. There is some drilling required for the safe removal of the two metal panels on the cowl. Using a ¼ drill bit, drill out the eight spot welds which fix the side cowl panels. Then install the four brackets around the cowl area. After assembling the other parts to be a set of Windshield Frame Cover, place it around the windshield. Adjust the position of the product carefully. At last, tighten all the bolts. 100% Brand new with high guality. Windshield Frame Cover Amor Set. Combines Roof Visor and Cowl. Aggressive design makes your Wrangler an Armour Style Beast. Added super protection around a-pillow and cowl area. Outer Sun Visor helps shade the eyes of drivers and passengers from the glare of sunlight. Comes with center LED lights insert. Includes 1×100W Strip LED spotlights provides excellent front visibility at night. Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the Vi-cowl main body, 8-gauge(11/64 Inch) for the structure mounting bracket. Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use. Moderate installation needs some drilling. Product weight: about 58 lbs. Windshield Frame Cover Assembly. Style & Surface-finish: Textured Black. 1 Set of Windshield Frame Cover Amor. 1x 100W LED Spotlights.
Steel Rear Bumper Fit For 2022-2024 Toyota Tundra withLED Lights & D-rings
W/LED Lights & D-rings. WITH 2 x LED Lights &. Condition : 100% Brand New. Color : Black(As Pictures). Number of Pieces: 1 Set. Placement on Vehicle: Rear. Mounting Style: Screw Mounting. Fitment Type: Direct Replacement. Items Included: Mounting Hardwares. Durable; No Drilling Required. Nice Looking, Eexclusive Design. Bumpers are Exclusively Distributed and Designed Separately, which not only make Your Car Nice, but also is Easy to Replace when some of the Bumpers’ Parts are Damaged. Duty Carbon Steel and Painting Surface 3mm. Make our Bumper more Corrosion-resistant and Durable. Our Rear Bumper is decorated with two LED-lights. 4.75T High-Strength D-ring. Rear bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper to achieve maximum strength. Our bumper Includes the Paper Instruction and are Engineered to be a Direct Bolt-on Upgrade Using just Basic Hand Tools, so there is No Drilling or Cutting Required for a Clean Straight Forward Installation. The shackle is not designed for towing and recovery, please refer to the owner’s manual for towing and rescue information; 2. Overload is NOT included in after-sales service. The black powder-coated surface (120 microns thick) and premium E-coating process have excellent strength and stiffness, as well as long-lasting durability and corrosion resistance, which can be protected for more than 5 years in normal use. Modular design bumper features rugged styling. Welded hoop protects the rear of the car in collisions. To Protect yourself / To Avoid collisions that can causeirreparable damage to your car / To Enhanced Oft-Roading Performance.
Black Rear Bumper Fits 2005-2015 Toyota Tacoma with2 LED Lights D-Rings
WITH 2 x LED Lights &. Condition : 100% Brand New. Color : Black(As Pictures). Number of Pieces: 1 Set. Placement on Vehicle: Rear. Mounting Style: Screw Mounting. Type: Rear Bumper Split design. Fitment Type: Direct Replacement. Items Included: Mounting Hardwares. Durable; No Drilling Required; Scratch-resistant. Nice Looking, Eexclusive Design. Bumpers are Exclusively Distributed and Designed Separately, which not only make Your Car Nice, but also is Easy to Replace when some of the Bumpers’ Parts are Damaged. Duty Carbon Steel and Painting Surface 3mm. Make our Bumper more Corrosion-resistant and Durable. Our Rear Bumper is decorated with two LED-lights. 4.75T High-Strength D-ring. Rear bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper to achieve maximum strength. Our bumper Includes the Paper Instruction and are Engineered to be a Direct Bolt-on Upgrade Using just Basic Hand Tools, so there is No Drilling or Cutting Required for a Clean Straight Forward Installation. The shackle is not designed for towing and recovery, please refer to the owner’s manual for towing and rescue information; 2. Overload is NOT included in after-sales service. The black powder-coated surface (120 microns thick) and premium E-coating process have excellent strength and stiffness, as well as long-lasting durability and corrosion resistance, which can be protected for more than 5 years in normal use. 3-piece modular design front bumper features rugged styling. Welded hoop protects the front of the car in collisions. To Protect yourself / To Avoid collisions that can causeirreparable damage to your car / To Enhanced Oft-Roading Performance.