Hyundai Sonata 2011 2012 2013 2014, Hyundai Sonata 2015 – Hybrid Engine, Kia Optima 2011 2012 – 2.4 L4 Engine, Kia Optima 2013 2014 2015 – 2.4 L4 Engine Manual Parking Brake, Kia Optima 2016 – 2.4 L4 Hybrid Engine Manual Parking Brake. 2011, 2012, 2013, 2014. 2.4 L4 Engine. 2.4 L4 Engine, Manual Parking Brake. 2.4 L4 Hybrid Engine, Manual Parking Brake. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Hyundai Sonata 2015 – Gas Engine Manual Parking Brake, Hyundai Sonata 2016 2017 2018 2019 – 305mm (12.01) Diameter Front Rotor Manual Parking Brake, Kia Optima 2016 2017 2018 2019 2020 – 305mm (12.01) Diameter Front Rotor Manual Parking Brake. Gas Engine, Manual Parking Brake. 2016, 2017, 2018, 2019. 305mm (12.01) Diameter Front Rotor, Manual Parking Brake. 2016, 2017, 2018, 2019, 2020. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front Lip Chin Bumper (4pcs). Condition: 100% Brand New. Type: Front Lip Chin Bumper Body Kits. Material: Made of high quality PP plastic, Durable. Color: Carbon Fiber Look (as pictures show). Placement on Vehicle: Front ; Lower. Give your vehicles sporty appearance. Protect Your Bumper From Scratching. Strict quality control standards to Build and test. Come With Screws, Pre-drilled holes for quick installation. Professional Installation Is Highly Recommended. 29 Side Skirt (2pcs). Condition: 100% Brand New and High Quality. Type: Car Body Side Skirts. Surface Finish: Carbon Fiber Style. Side Skirt Size: 29inch/74.5cm. Position: Side Skirt Extension. Universal modified side skirt for car sedan. While the side skirts don’t affect the front ground clearance too much, it enhances the side extension of the in a very pure and exciting way. A Perfect Aftermarket Replacement. Type: Car Body Rear Lip. Rear Lip Size:19inch. Placement on Vehicle: Left, Right. Length: The length can be adjustable from 7.87″ to 13″ (200-330mm) Material: Stainless Steel Quatity: 2 x Stainless Steel Bumper Lip Splitter Tie Rod Bars. Stainless steel has weldability, corrosion resistance and heat resistance. Position: This exquisite and compact lever is mainly fixed on the body components (front and rear surround, skirt, head and tail lip), and can also be installed in the car center console or interior trim panel Require: Product will require drilling holes into the bumper and/or lip/diffuser to attach safely to the vehicle. 4 pcs /set Front Lip Chin Bumper Body Kits. 2 x Side Skirts. 2 x Rear Lip. 2 X Strut Splitter Rods. 1 x Screws kit. Installation instruction is not included, professional installation is recommended. Product may require drilling holes and use the screws to permanently secure. Please allow 1-3CM differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.