Daily Archives: June 17, 2024
PET Honeycomb Carbon Fiber Satin Black Hex Car Vehicle Vinyl Wrap Decal Sheet
PET Honeycomb Carbon Fiber Satin Black Hex Car Vehicle Vinyl Wrap Decal Sheet. Heat Transfer Vinyl (HTV). Glow in the Dark. One Way Vision (OWV). Auto Parts & Accessories. Mirror & Mirror Cover. Steering Wheel & Cover. Door Guard & Trim. Paint Protection Film (PPF). For smaller size orders, top clear protective film will be peel off to prevent tunneling. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. The color of the images shown here may vary depending on your screen settings. For the real representation of the product always check the color swatch or Sample. Check vinyl before use. Partially cut vinyl storage – must remove top clear protective film. If not, it will cause tunneling. Unused roll of vinyl storage – must TIGHTLY (no gap between layers) roll the vinyl and tape up to avoid tunneling. Film: Vinyl, Hybrid Composite Material (Cast / Calendar). Thickness (Face only): 3.7 – 4.1 mil. Thickness (Adhesive): 1.6 mil. Film Type: High-grade polymeric vinyl film. Adhesive: Low-Tack Solvent Acrylic. Protective Liner: PET Liner. Release Liner: PET Liner. Durability: Up to 5 years. Removable: Removable with heat. Storage Period: 3 Years from the Manufactured Date in Temperature Range of 68 F – 78 F (20 C – 26 C) Relative Humidity 50%, Indoor Storage in Original Package. Post-Heat Temperature: 175 F – 185 F (79.5 C – 85 C). Recommended Installation Area Temperature: 70 F – 80 F (24 C – 26.5 C). Comfortability: Flat, simple and moderate compound curves, convex and concave surfaces. Directional: All vinyl films are recommended to be installed directionally. Test the film if non directional installation is desired. Dimensional stability: shrinkage less than 2%. Chemical Resistance: Resists Most Mild Acids, Mild Alkalis and Salt Application Method: Dry Application Only. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
Front & Rear Brake Rotors + Ceramic Pads for 2017 2018 2019 Ford Escape
Ford Escape 2017 2018 – 1.5 L4 Engine FWD; 2.5 L4 Engine, Ford Escape 2019 – 1.5 L4 Engine FWD – 2.5 L4 Engine. 1.5 L4 Engine, FWD; 2.5 L4 Engine. 1.5 L4 Engine, FWD – 2.5 L4 Engine. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.