Monthly Archives: August 2024
Next page →
← Previous page
Titanium alloy carbon fiber bearing fast opening EDC knife S35VN blade material
Total length: 21.5cm. Handle length: 12.3cm. Handle material: Carbon fiber +TC4 titanium alloy CNC. Blade length: 9.1cm. Blade thickness: 0.4mm. Blade width: 2.2mm. Hardness: 60-61HRC (vacuum oil quenching heat treatment + tempering 2 times). Back clip: TC4 titanium alloy. Weight: 192g (including packaging). Packing: Gift box screw: all screws 420 stainless steel hardness HRC45, full CNC precision machining, built-in bearing ball system. PS: The product is sharp, please keep away from children.
6Pcs Real Carbon Fiber Pillar Panel Cover Fits SXE10 99-05 IS200 IS300 ALTEZZA
Window pillar post trim cover. Real dry carbon fiber material with gloss clear coat finish. Light weight wont tear. NOT VINYL wrap paper material. Cover up old faded plastic. Easy to install without remove parts. Avoid bending if clear coat is hard due to cold climate maybe result crack. Product required to be heated until clear coat reach flexible before install. Best is to place in the sun for about 5 mins till flexible and heated evenly. Or use dryer to make it flexible enough to fit the interior contour. Clean interior surface few times with tooth brush and hot water ensure wax removal for better sticking surface, then wipe / dryer till fully dry before sticking. Press and hold firmly few mins. Check in the few days after installed maintain press hold if come loose due to climate temperature. European cars interior have environmental friendly coating will preventing double side from sticking. This may required to use epoxy glue to secure in place. We are not responsible if double side wont stick to your trim. It is buyers responsibility to prepare or clean the surface before installing. Professional installation is required. Avoid car wash within 48 hours after installed. Do not use wax or clear products to clean will damage to clear coat caused discoloring.
Front & Rear Brake Rotors + Ceramic Pads for 2018 2019 2020 2021 Honda Accord
Honda Accord 2018 – EX – EX – EX-L – EX-L – LX – LX, Honda Accord 2019 – EX – EX – EX-L – EX-L – LX – LX, Honda Accord 2020 – EX – EX – EX-L – EX-L – LX – LX – SE – SE, Honda Accord 2021 – EX-L – EX-L – LX – LX – SE – SE. EX – EX – EX-L – EX-L – LX – LX. EX – EX – EX-L – EX-L – LX – LX – SE – SE. EX-L – EX-L – LX – LX – SE – SE. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Klaus Meyer Contour Finest high carbon steel 19 Piece Knife Block Set
Contour 19 Piece Set. 8” Chef’s Knife. 5.5” Santoku (Hollow Edge). 4.5” Steak Knife x 8. 3.5” Paring Knife. 1? Finest Stainless Steel Blade Quality. The finest high carbon steel maintains its sharpness over a long period, reducing the need for frequent sharpening. After unique treatment the blade is less prone to chipping and corrosion, maintaining its functionality and appearance. 2? Weight Added Stainless Steel Hollow Handle with Contour Curved Handle. The added weight in the handle provides better balance, making the knife easier to control. A contour curved handle with supremely elegant design enhances grip and comfort, reducing hand strain during extended use. 3? Matte Surface Finish of the Handle. A matte surface on the handle offers a non-slip grip, improving safety and precision in cutting. 4? 53-55 Rockwell Hardness with 15-17 Edge Angle Degree. This level of hardness indicates a good balance between blade flexibility and strength, making it suitable for various cutting tasks. The 15-17 degree edge, deemed as “Golden Angle” of a knife, allows for sharp, precise cuts, enhancing. 5? Oil-Hardened Blades – Exceptional Sharpness and Durability. The process of oil quenching, or oil hardening, is a specialized heat treatment used for these blades. It involves the heating of the knife followed by rapid cooling in oil. This technique offers significant advantages. Reduced Oxidation: By minimizing the blade’s exposure to air during the cooling phase, the process effectively prevents the formation of surface oxidation layers. This enhances the overall quality and lifespan of the blade. Increased Blade Hardness: Oil quenching yields a greater hardness in the steel (by about 1-2HRC) compared to traditional air cooling methods within the same temperature range. Enhanced Toughness and Corrosion Resistance: The oil used in this quenching process forms a protective barrier over the blade. This barrier not only averts oxidation but also improves the blade’s toughness and resistance to rust, surpassing the performance of blades treated with conventional heat methods. The knife’s overall cutting performance. Advantages of this process include preventing prolonged exposure to air, which controls the formation of surface oxidation layers. Oil quenching also results in higher hardness (1-2HRC higher) compared to air cooling in the same temperature range. The oil used in the quenching process covers the blade surface, preventing oxidation and resulting in better toughness and rust resistance compared to conventional heat treatment.
Front & Rear Drilled Brake Rotors + Pads for 2007-2013 2014 2015 Mini Cooper
Mini Cooper 2007 2008 2009 2010 2011 2012 2013 – 280mm (11.02) Diameter Front Rotor 259mm (10.20) Diameter Rear Rotor, Mini Cooper 2014 2015 – 280mm (11.02) Diameter Front Rotor 259mm (10.20) Diameter Rear Rotor 4 Lug. 2007, 2008, 2009, 2010, 2011, 2012, 2013. 280mm (11.02″) Diameter Front Rotor, 259mm (10.20″) Diameter Rear Rotor. 280mm (11.02″) Diameter Front Rotor, 259mm (10.20″) Diameter Rear Rotor, 4 Lug. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Berkey Travel Water System BlemishedWith 2 Brand New Ceramic Filters
Berkey® Systems: Same Great Performance, Special Price! Berkey® systems may be scratched or dented. Systems ARE NOT warrantied against cosmetic defects. Specifications for the Travel Berkey® System. The 1.5 gallon Travel Berkey® System comes standard with 7 British Berkefeld Ceramic Filters, and is ideal for 1-3 people for everyday use. Holds up to 1.5 gallons of purified water. 7 British Berkefeld Ceramic Filters. System is 7.5″ in diameter x 18″ in height. AISI 304 stainless steel construction. Included in the box. Upper and lower chambers. 1 stainless steel lid, knob and screw. 2 wing nuts, 2 washers.
Drop Running Boards for 2015-2024 Chevy Colorado/GMC Canyon Crew Cab Side Steps
Unique Design – Exclusive patented design offers your vehicle an awesome appearance and an extra step for convenient entry and exit; It will distinguish you from the crowd and allow you to enjoy a great driving experience. Premium Material – The side step bars are made from thick, heavy duty steel pipes with a weight capacity of 550 lbs. Features durable powder coating that provides your vehicle side protection against dirt, water, and rust, and allows for easy entry and exit. Easy DIY Installation – The nerf bars adopt a bolt-on design for easy installation at home using just general garage tools; No drilling or cutting required. Note: The bracket is not pre-welded on the step bars! Uses reinforced carton as exterior packaging and filled with inner lining to prevent damage during transport. Why Choose Our Side Steps? Extruded carbon steel construction is strong, lightweight and rust free. Features a full-length surface so you can easily climb into and out of the vehicle. Low-profile design maintains the driving height while improving the driving experience and external aesthetic. Mounting brackets Manufactured from carbon steel Black textured Six-sided tube profile Bolt-on installation No drilling required Unique powder coating Unique non-slip pattern.
Front & Rear Drilled Brake Rotors + Pads for Subaru Legacy Outback WRX
Subaru Legacy 2015 2016 2017 2018 2019 – 3.6 H6 Engine, Subaru Outback 2015 2016 2017 2018 2019, Subaru WRX 2016 2017 2018 2019 2020 2021 – EyeSight Technology. 2015, 2016, 2017, 2018, 2019. 3.6 H6 Engine. 2016, 2017, 2018, 2019, 2020, 2021. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Next page →
← Previous page