Tag Archives: chevy
Next page →
Front & Rear Drilled Brake Rotors + Pads for 2015-2020 Chevy Colorado GMC
Chevrolet Colorado 2015 2016 2017 2018 2019 2020, GMC Canyon 2015 2016 2017 2018 2019 2020. 2015, 2016, 2017, 2018, 2019, 2020. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Drilled Slotted Rotors + Pads for 2016-2020 2021 Chevy Malibu
Performance Max Brakes Kit. Please note that the rotors and pads may change in style depending on the car models specification. Performance Front Rotors. Performance Rear Rotors. Elite Max Front Pads. Elite Max Rear Pads. Pair of Gloves. 2016, 2017, 2018, 2019, 2020, 2021. Manual Parking Brake. Performance Driven: Stable braking performance across a wide temperature range. Versatile Excellence: Tailored for cars, SUVs, vans, and trucks, this brake kit adapts seamlessly to diverse vehicles. Rounded Slots Slots boost brake grip, cut stopping distance in wet conditions, and deter pad glazing by expelling gas and debris. Cross-Drilled Drilled holes provide maximum rotor cooling during extreme operating conditions and feature a chamfer design to reduce the potential for cracking. Black Coating Eco-conscious black e-coating delivers long-lasting protection against rust and corrosion, ensuring maximum durability. Aesthetic look The cross-drilled and slotted rotor design provides a striking and eye-catching visual appeal for vehicles with open-wheel designs. ELITE MAX BRAKE PADS FEATURES. Accessories Included For silencing brake noise and providing lubrication to the calipers. Stainless steel hardware is included for effortless installation. Chamfer & Slots Design Precision-engineered for optimal performance, ensuring silent stops and a safer drive. Dual-Layer Rubber Shims Engineered to deliver brake performance without unwanted noise. Positive Mold Technology The design ensures consistent friction material density, resulting in even wear, braking performance, and pedal feel. Cross Drilled, Slotted Black Anti-rust E-Coating. Silver Geomet Anti-rust Coating. Asbestos-Free Copper-Free (Minimal Dust). Asbestos-Free Low-Copper (Low Dust). Performance Rotors + Elite Max Brake Pads. Comfort Rotors + Elite Max Brake Pads. Style Rotors + Carbon Ceramic Brake Pads. Value Rotors + Carbon Ceramic Brake Pads. Choose a reason and add comments if needed. Upload photos if the item is damaged. Submit the return request.
Front Rear Drill Brake Disc Rotors Pads for Chevy Equinox GMC Terrain 2010-2017
Front & Rear Drilled & Slotted Brake Rotor + Carbon Fiber Ceramic Brake Pad Kit Kit Includes: 2x Front Drilled & Slotted Disc Brake Rotors S-55174 2x Rear Drilled & Slotted Disc Brake Rotors S-55178 2x Front Ceramic Brake Pads (Hardware Included) P-1421 2x Rear Ceramic Brake Pads (Hardware Included) P-1275 12.64 inch (321mm) Front Rotor Rotor Specifications: Cast from OE Grade Alloy Machined to OE Specs Fits Left & Right Front of Vehicle Direct Replacement 5-Lug Wheel Holes FITS: MAKE MODEL YEAR RANGE SPECIFIC DETAILS CHEVROLET EQUINOX 2010 – 2017 All Models GMC TERRAIN 2010 – 2017 All Models. 2x Front Drilled and Slotted Disc Brake Rotor S-55174. 12.64 in, 321mm. 2x Rear Drilled and Slotted Disc Brake Rotor S-55178. 11.93 in, 303mm. 2x Front Ceramic Brake Pad (with Hardware Included) P-1421. 2x Rear Ceramic Brake Pads (Hardware Included): P-1275. New installed, if noise, it takes hundreds of miles to run in. If shaking, usually not installed correctly, try to install again. Carbon-Fiber Ceramic Brake Pad. Carbon-Fiber reinforced Ceramic formula VS. Maximum Cooling, with superior braking power. Front Rotors 12.64 in (321mm) Diameter. Rear Rotors 11.93 in (303mm). 48,000 miles or 4-Year Life. With Hardware for Brake Pad. Rotors with Geomet Zinc Coated, keeps it rust free, offer a longer working life. Rotors come with drilled holes help keep rotors temperatures down during extreme braking performance. Circular slots help wipe away gas or debris – keep a clear constant patch on the rotor surface for safe, smooth braking. Brake pad and brake rotor fit perfectly can eliminate the noise. We focus on creating the best product. Only high end advanced optical design are adopted. About Weize, Main product: Storage Backup Battery, Motor Battery, ATV/UTV/Trailer Tires, Motor Accessores, Solar Panel Power System etc. For remote areas, it could be a little longer. Any concern, we will try our best to help you. Our working time(excluding holidays): Monday to Friday, 9:00-18:00.
Front & Rear Drilled Brake Rotors + Pads for Chevy Equinox Malibu GMC Terrain
Buick LaCrosse 2017 2018 2019 – eAssist Technology, Buick Regal Sportback 2018 2019 2020 – 2.0 L4 Engine FWD, Chevrolet Equinox 2018 2019 2020 2021 – 300mm (11.81) Diameter Front Rotor, Chevrolet Malibu 2016 2017 2018 2019 2020 2021 – Electric Parking Brake, GMC Terrain 2018 2019 2020 2021 – 300mm (11.81) Diameter Front Rotor. 2.0 L4 Engine, FWD. 2018, 2019, 2020, 2021. 300mm (11.81) Diameter Front Rotor. 2016, 2017, 2018, 2019, 2020, 2021. Electric Parking Brake. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Brake Rotors + Ceramic Pads for Chevy Malibu Buick LaCrosse Regal
Buick LaCrosse 2012 2013 2014 2015 2016 – Solid Rear Rotor, Buick Regal 2011 – 2.4 L4 Engine, Buick Regal 2012 2013 2014 2015 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu Limited 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu 2013 2014 2015 – 296mm (11.65) Diameter Front Rotor. 2012, 2013, 2014, 2015, 2016. Solid Rear Rotor. 2.4 L4 Engine. 296mm (11.65) Diameter Front Rotor. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Brake Rotors + Ceramic Pads for 2016-2021 Chevy Cruze Volt
Chevrolet Bolt EV 2017 2018 2019 2020 2021, Chevrolet Cruze 2016 2017 2018 2019, Chevrolet Volt 2016 2017 2018 2019. 2017, 2018, 2019, 2020, 2021. 2016, 2017, 2018, 2019. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Drop Running Boards for 2015-2024 Chevy Colorado/GMC Canyon Crew Cab Side Steps
Unique Design – Exclusive patented design offers your vehicle an awesome appearance and an extra step for convenient entry and exit; It will distinguish you from the crowd and allow you to enjoy a great driving experience. Premium Material – The side step bars are made from thick, heavy duty steel pipes with a weight capacity of 550 lbs. Features durable powder coating that provides your vehicle side protection against dirt, water, and rust, and allows for easy entry and exit. Easy DIY Installation – The nerf bars adopt a bolt-on design for easy installation at home using just general garage tools; No drilling or cutting required. Note: The bracket is not pre-welded on the step bars! Uses reinforced carton as exterior packaging and filled with inner lining to prevent damage during transport. Why Choose Our Side Steps? Extruded carbon steel construction is strong, lightweight and rust free. Features a full-length surface so you can easily climb into and out of the vehicle. Low-profile design maintains the driving height while improving the driving experience and external aesthetic. Mounting brackets Manufactured from carbon steel Black textured Six-sided tube profile Bolt-on installation No drilling required Unique powder coating Unique non-slip pattern.
8 x 850cc fit Siemens Deka 80lb Fuel Injectors EV1 Chevy Ford LS1 LT1 LSX V8 e85
80LB high Impedance fuel injectors, fit. Use for super street or racing applications: Domestic and Import Ford, Chrysler, GM, BMW, VW, Audi, Mitsubishi, etc. This is a Siemens/Deka single-hole disc-type fuel injector. CAR and some imports with EV1 electrical connection. 1999/2001 Ford Mustang Cobra. Chevy Corvette and Camaro V8’s. Pontiac Firebird and TransAm V8’s. Fit Deka Siemens, Reliable Injectors. Standard Long Length 60mm 0-ring to o-ring. 80lb/hr = 850 cc/min. Low Impedance performance characteristics with High Impedance Compatibility. Dynamic Flow Rate : 18.6 mg/pulse 2.5ms PW, 20 ms Period. Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers). Connector: fit Bosch EV1. Series: fit DEKA 4 (DEKA IV). Brand new high-performance, fit Siemens Deka, 80lb, 850cc fuel injector. Part number: FI-114992 / 110324 All new Viton O-rings are supplied for installation. Injector Body Design: Pencil, Metal and composite plastic. Injector type: fit Siemens/Deka 110324 – Long EV1 electrical connector. Flow rate: 80 lbs/hr, 850 cc/min at 43.5 psi (3 bar). Length: 3 inches, 74 mm. O-rings: Top and bottom, 14.5 mm. If you need EV1 Connectors we will include them free of charge.
6 Running Boards for 2015-2024 Chevy Colorado Canyon Crew Cab Bolt-on Side Step
You May Also Like. Type: Nerf Bars / Side Steps / Running Boards. Placement on Vehicle: Left, Right. Surface Finish: Power Coated/Textured. Functional Convenience: Features two-stair layout & innovative 4-inch drop to provide better convenience for vehicles with lift kits and oversized wheel tires. Also allows for easier rooftop operation. The step plates are detachable and paintable for further customization. The geometric plate panel prevents mud sprays and allows for easy cleaning. Bolt-on Installation: Welded brackets provide additional strength. Assembly is quick and simple with the minimum number of accessories needed. No cutting or drilling required. Strong and Durable Design: Unique powder coating offers exceptional rust and corrosion resistance so you can drive under any condition. The laser cutting step plate achieves a non-slipping step surface and reinforced grip. Proven to handle up to 550 lbs without bending. No-hassle Service and Note: The bracket is not pre-welded on the step bars! Please confirm the cab picture in the listing before ordering. For your safety, professional installation recommended. 1 x DIY Installation manual. 1 x All accessories package kit.
Front & Rear Brake Rotors + Ceramic Pads for Chevy Malibu Buick LaCrosse Regal
Buick LaCrosse 2012 2013 2014 2015 2016 – Solid Rear Rotor, Buick Regal 2011 – 2.4 L4 Engine, Buick Regal 2012 2013 2014 2015 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu Limited 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu 2013 2014 2015 – 296mm (11.65) Diameter Front Rotor. 2012, 2013, 2014, 2015, 2016. Solid Rear Rotor. 2.4 L4 Engine. 296mm (11.65) Diameter Front Rotor. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Next page →