3D Carbon Fiber Textured Black Matte Vinyl Wrap Sticker Decal Air Bubble Free
3D Carbon Fiber Vinyl Wrap Air Release Technology Free Wrapping Tools. Free Tool Kit Requirement. Size 4″x8″ DO NOT come with Tool Kit. Size 12″x60″ and above Include 1 set of Tool Kit. Each order come with maximum 1 set of Tool Kit. Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal and painted metal surfaces. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use.