1095 carbon steel black double NINJATO Japanese ninja sword katana musashi tsuba. The ninjato is often portrayed as having a straight blade (similar to that of a shikomizue) with a square guard. Hayes suggests that the typical description of the ninjato could be due to ninja having to forge their own blades from slabs of steel or iron with the cutting edge being ground on a stone, with straight blades being easier to form than the much more refined curved traditional Japanese sword. His second possible reason for ninjato being described as a straight-bladed, rather short sword could be that the ninja were emulating one of the patron Buddhist deities of ninja families, Fudo Myo-oh, who is depicted brandishing a straight-bladed short sword similar to a chokuto. Stephen Turnbull, a historian specializing in the military history of Japan indicates of historical ninja: The most important ninja weapon was his sword. This was the standard Japanese fighting sword or katana… For convenience the ninja would choose a blade that was shorter and straighter than usual. Blade thickness: 0.7 cm / 0.28 inch. Blade width: 3.2 cm / 1.26 inch. Blade length: 70 cm / 27.6 inch. Overall length: 103 cm / 40.6 inch. Blade Material: High carbon steel, electroplating black. Straight & double swords. Saya (scabbard): Black matte sheath. Handle(tsuka): 26 cm / 10.24 inch, Wrapped with black flat wax cord. Other fittings: Brass habak i& high-grade brass seppa (electroplating black) + brass kashira (electroplating black)+ black silk sageo. About 1095 carbon steel. The best quality of high carbon steel is at 1095, the carbon content was 1.03%, and the element contains a small amount of chromium, molybdenum, vanadium, after heat treatment can reach HRC 58-60 hardness, toughness is very good, but not resistant to rust, more be applied to traditional european-style hunting knife, large cutting knife and military dao. Such as the United States during world war ii “KA – BAR” saber is in 1095 as the blade material. Plating (Electroplating) is the use of electrolytic principle in some metal surface on a thin layer of other metal or alloy plating process, is the use of electrolytic action made of metal or other materials adhered on the surface of the parts of a layer of metal film technique to prevent metal oxidation (rust), improve the wear resistance and electric conductivity, reflective resistance, corrosion resistance, copper sulfate, etc. And improve aesthetics, and so on. The item have two straight swords, full black. The blade is no bo-hi, electroplating black and no wavy hamon. As the shooting light, angle and color displays, physical and photos maybe some differences! The stand is only for display, not included in the package. If you don’t like the original mountings, you can choose the favorite ones from the options. Handle wrapping cord and saya cord should be the same color. If you only want to change one of them to another color, please inform of it specially. We can engrave English words, Chinese Characters on the blade for free. We can add or remove the machine-made wavy hamon for free. Usually thought be used for bloodletting only. It is also used to lighten the weight of the sword. We can add or remove Bo-hi for free. Most of our blades are sharp. We can also make the blade unsharpened for free if you require. The price varies from different swords. International Buyers – Please Note. Please contact with us before you leave feedback. We will try our best to solve the problem for you, thank you. Sometimes, you may not get our reply immediately due to the time difference among each country. However, please be assured that we’ll strive to reply you as soon as possible once we got your messages. This item is in the category “Collectibles\Knives, Swords & Blades\Swords & Sabers\Asian\Japanese”. The seller is “moranguoji2015″ and is located in this country: CN. This item can be shipped worldwide.
- Type: katana
- Tang: Full
- Handle Material: Wood
- Blade Material: Carbon Steel
- Theme: Samurai
- Dexterity: Right-Handed
- Edge: Single, Straight
- Handedness: Double-Handed
- Brand: SJ SHI JIAN
- Color: Black
- Original/Reproduction: Original
- Country/Region of Manufacture: China
- Style: Japanese
AKANDO ATR SHOES in. Black / Wonder Red / Carbon. RUGGED SHOES FOR THE COLD MONTHS, MADE IN PART WITH RECYCLED CONTENT. Leather and suede upper with CORDURA® panels. Adidas Originals AKANDO ATR SHOES in Black / Wonder Red / Carbon RUGGED SHOES FOR THE COLD MONTHS, MADE IN PART WITH RECYCLED CONTENT. Regular fit Lace closure Leather and suede upper with CORDURA® panels Textile lining Rubber outsole. This item is in the category “Clothing, Shoes & Accessories\Men\Men’s Shoes\Athletic Shoes”. The seller is “diankastore” and is located in this country: GB. This item can be shipped worldwide.
- Shoe Size-: 11.5
- Style: Hi -cut Trainer
- Personalized: No
- Vintage: No
- Country/Region of Manufacture: Vietnam
- Upper Material: Leather and suede upper with CORDURA
- Theme: Sports
- Lining Material: Textile
- Department: Men
- Type: Trainer
- Season: Autumn, Spring, Winter, Summer
- Brand: adidas
- Performance/Activity: Walking, Basketball, Gym & Training
- Outsole Material: Rubber
- UK Shoe Size: All Sizes
- Color: Core Black / Wonder Red / Carbon
- Occasion: Activewear, Casual
- Model: adidas Akando
- Features: Breathable, Comfort, Cushioned
- Customized: No
- Insole Material: Foam
- Product Line: adidas Originals
- Shoe Width: Standard
Condition: 100% Brand New & High Quality. 100% brand new and high quality guaranteed. Decorate your car charming luxury vivid. Easy to use and to operate at affordable prices. Perfect cover that is useful, helpful and so practical. Easy to use and to operate. Clean surface and remove any dirt, oils before attaching decal. Place decal on a hard smooth surface. (front side of decal facing up). Slowly peel off the back sheet off the decal. (make sure do not let any water or dirty get on the back of this decal). Slowly apply the decal to the smooth surface you like. (Keep it slowly to avoid any air bubble). Please keep it dry in 24 hours. 1 Sets(2pcs)Central Console Gear Shift Panel Trim. If you need more items of this model, please visit our store, thank you! To make sure the order is smooth, We suggest customer to pay as below. To make sure all order can be sent in time, We encourage customer to pay as soon as order placed, If order don’t be paid in seven days after be placed, Un-paid case will be opened. But we will work with customer together to make sure deliver easily and to be the lowest cost. To United Stated, Normally we will send by E-packet or SpeedPAK, It is normally need 7-12 work days 2. To Europe, Normally we will send by China post or SpeedPAK, It is normally need 15-25 work days 3. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Trim”. The seller is “actiti” and is located in this country: CN. This item can be shipped worldwide.
- Brand: Unbranded
- Manufacturer Warranty: YES
- Country/Region of Manufacture: China
- Material: ABS Plastic
- Color: As Picture Shown
- Model: For Acura RDX 2013-2016
- UPC: 7780788180783
Hydro-Dip Carbon Fiber Finish (see Photo). Red center strip on Top. Perforated Black leather on Left/Right handle. 100% Brand new item. WHAT’S IN PACKAGE. 1 x STEERING WHEEL. (Steering wheel only, No other parts included) (Swap your original parts from your wheel, including airbag, trim, and bottoms). Installation instruction is not included. Professional installer is recommended. 48 states w/ physical addresses only. Usual transit time is 3-14 days, depends on destination. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Steering Wheels & Horn Buttons”. The seller is “a1_auto” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Material: Leather
- Type: Steering Wheel
- Surface Finish: Hydro Dip Carbon Fiber
- Fitment Type: Direct Replacement
- Color: Black
- Brand: REVESOL
- Items Included: Steering Wheel
Hand Forged Carbon Steel Black Japanese Wakizashi And Katana Samurai Sword Sets. Overall Length:103cm / 40.6 inch. Blade Material:1095High Carbon Steel. Nagasa Length:73cm / 28.7 inch. Handle Material:Genuine Ray skin + Hard wooden. Handle Length:27.00cm / 10.6 inch. Saya Material:High quality wood. Kasane(thickness at habaki) :7.0mm. Tsuba Material:High quality alloy Tsuba. Sakihaba(width near yokote)2.8 cm. Sakikasane(thickness at yokote):3mm. Overall Length: 30.7 inch / 78.0 cm. Nagasa Length: 29.7 inch / 50.0 cm. Handle Length: 7.8Inch / 20 Cm. Notice: Due to our swords are full hand made, so Specs will varyslightly from sword to sword. The balde was made of 1095 High Carbon Steel in Maru structure, it was Fully hand forged, hand shaping, hand polishing in the most traditional method of sword making. The blade was well heat treating (Refining) and quenching(Tempering) greatly improve the hardness and flexibility of the balde for real use. The blade comes with a full length Tang greatly enhances the strength of the sword while swung and it will be signed according to your requirements. Tsuka(Sword handle):The Tsuka is made of high quality wood wrapped with genuine ray skin(Samegawa), and tightly tied with real silk ITO. Two Mekugi (peg) was nailed to secure the full tang of the sword, the sword can be disassembled by picking up the two Mekugi (peg). Tsuba sets(sword Guard):The Tsuba (guard), Fuchi (sleeve) and Kashira (buttcap) are made of high quality alloy with exquisite workmanship and fine elaboration. The tsuba is Secured by Two Copper Seppas (Spacer), The Fuchi (sleeve) and Kashira (buttcap) are made well match the tsuka for a good balance. Habaki&Seppa:The habaki(blade collar) and the seppas (Spacer) are made of high quality brass. Saya(Sword Scabbard):The saya is made by dry wood and put them through hacking, slotting, gluing, polishing and shaping treatment, and design proper degree of tightness for the sword blade to enter and out. 1-A free&random sword bag comes with the sword. 2-The display stand is NOT included. 3-Due to All of our products are full handmade, So the specification varies a little from sword to sword. This item is in the category “Collectibles\Knives, Swords & Blades\Swords & Sabers\Asian\Japanese”. The seller is “shadowless-sword-211″ and is located in this country: CN. This item can be shipped worldwide.
- Country/Region of Manufacture: China
- Blade Material: 1095High Carbon Steel
- Style: Japanese
- Dexterity: Ambidextrous
- Theme: Samurai
- Original/Reproduction: Original
- Type: Katana
- Edge: Single, Curved
- Color: Black
- Handle Material: Genuine Ray skin + Hard wooden
- Handedness: Double-Handed
- Tang: Full