Tag Archives: black
Next page →
← Previous page
7D Carbon Fiber Low Tack Black High Gloss Car Vinyl Wrap Sticker Decal Sheet
5D Carbon Fiber Low Tack Black High Gloss Car Vinyl Wrap Sticker Decal Sheet. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D Carbon Fiber Textured Black Matte Vinyl Wrap Sticker Decal Air Bubble Free
3D Carbon Fiber Vinyl Wrap Air Release Technology Free Wrapping Tools. Free Tool Kit Requirement. Size 4″x8″ DO NOT come with Tool Kit. Size 12″x60″ and above Include 1 set of Tool Kit. Each order come with maximum 1 set of Tool Kit. Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal and painted metal surfaces. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use.
NEW Cuetec Cynergy Black Propel Carbon Jump Pool Cue, Billiards, 3 free GIFTS
Cynergy Carbon Fiber Composite Propel Jump Shaft. Carbon Fiber Composite Main Handle. Double Band Silver Accent Rings. Unique BLACK Edition Color Scheme. Taom® 2.0 Break/Jump Tip. Designedand developed to provide the most effortless and dynamic jumping experience, each and every component of a Propel jump cue was engineered forout-of-this-world performance. Featuring an all-composite construction andweighing in at an ultralight 11 ounces with its weighted extension attached, Propel jump cues not only excel at both full-table and close proximity jumps, but provide tremendous accuracy and eliminate unintended side spin thanks totheir oversize 13.9mm tip diameter. Packed with Carbon Fiber technology notonly in the shaft but also the main handle, Propel jump cues transfer moreenergy than any other jump cue we have ever tested. Safe, just isn’t quite assafe when you have a Propel in your arsenal. Howeverthey are returnable if there is. Somethingwrong with them that is not. Or any other Products That have been used. ALLCUES ARE FULLY INSPECTED BEFORE THEY.
7D Carbon Fiber Black High Gloss Auto Vinyl Wrap Sticker Sheet Film Decal DIY 6D
7D Carbon Fiber Black High Gloss Auto Vinyl Wrap Sticker Sheet Film Decal DIY 6D. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Application: from +10°? To +20°? , usage from -30°? To +30°? Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
5D Premium HIGH GLOSS Black Carbon Fiber Vinyl Wrap Bubble Free Air Release
Unique Function Air guide groove: No longer need to worry about the bubble, even if the temperature is very high. Memory repair function: If the vinyl wrinkles up, a hair dryer and a board is enough to smooth it. What’s the difference between 3D, 4D, and 5D? 3D: It has stereo strips on its surface, give people a visual 3D feeling. However, the 3D strips couldn’t perfectly work under dark and strong light environment, and also easy to absorb dust and be broken. 4D: It changes the 3D strips inside the surface, which is a higher technology. This technology solves the dark light problem and makes the strips more stereo under street lamp.
2D Carbon Fiber High Glossy Black Gold Vinyl Wrap Sticker Air Release Sheet Film
Type of film: Hybrid vinyl film with air channels(Designed for vehicle exterior with prefect paint condition). This vinyl is designed for vehicle exterior wrap use ONLY.
2D Carbon Fiber High Glossy Black Gold Vinyl Wrap Sticker Air Release Sheet Film
Heat Transfer Vinyl (HTV). Type of film: Hybrid vinyl film with air channels(Designed for vehicle exterior with prefect paint condition).
2D Carbon Fiber High Glossy Black Silver Vinyl Wrap Sticker Air Release Sheet
This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl is not originally designed for plotter or cutter use. Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany.
Black Inc Carbon Fiber Road Handlebar (Matte Black)36/38/40/42/44 cm
Finish: UD matte black. Width c-c: 36/38/40/42/44 cm. No fake product from Cyclingvelo! Weight: 212 g (For reference only).
Car key Fob RFID Signal Blocking Case Pouch Faraday Bag Cage Protector Black Lot
Application: RFID Blocking Key Bag, etc. Function: Rfid information anti-scanning / anti-radio information leakage / shielding vehicle key signal. Keep your Car Safe with this Car Fob Case with inbuilt Signal Blocker Lining.
Next page →
← Previous page