Tag Archives: buick
Front & Rear Brake Rotors + Ceramic Pads for Chevy Malibu Buick LaCrosse Regal
Buick LaCrosse 2012 2013 2014 2015 2016 – Solid Rear Rotor, Buick Regal 2011 – 2.4 L4 Engine, Buick Regal 2012 2013 2014 2015 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu Limited 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu 2013 2014 2015 – 296mm (11.65) Diameter Front Rotor. 2012, 2013, 2014, 2015, 2016. Solid Rear Rotor. 2.4 L4 Engine. 296mm (11.65) Diameter Front Rotor. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Brake Rotors + Ceramic Pads for Chevy Malibu Buick LaCrosse Regal
Buick LaCrosse 2012 2013 2014 2015 2016 – Solid Rear Rotor, Buick Regal 2011 – 2.4 L4 Engine, Buick Regal 2012 2013 2014 2015 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu Limited 2016 – 296mm (11.65) Diameter Front Rotor, Chevrolet Malibu 2013 2014 2015 – 296mm (11.65) Diameter Front Rotor. 2012, 2013, 2014, 2015, 2016. Solid Rear Rotor. 2.4 L4 Engine. 296mm (11.65) Diameter Front Rotor. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front & Rear Brake Rotors + Ceramic Pads for Chevy Traverse Buick Enclave
Buick Enclave 2018 2019 2020 – FWD, Chevrolet Blazer 2019 2020, Chevrolet Traverse 2018 2019 2020, GMC Acadia 2017 2018 2019 2020. 2017, 2018, 2019, 2020. For your new braking system to operate at its performance capacity, it is important to’break-in’ the rotors and brake pads. This procedure is called bedding and it is encouraged you follow the steps below upon completion of the installation. Find a safe and open area where you will be able to accelerate and stop safely multiple times. Accelerate to 35mph (55km/h) and aggressively stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Repeat this six times. Accelerate to 35mph (55km/h) and this time, moderately stop to 5mph (8km/h) in rapid successions without letting the brakes cool down and without stopping. Drive around for approximately 6-8 minutes at a moderate speed without excessively using the brakes or coming to a complete stop. For Elite XDS & Geomet OE (our coated rotors), and 3 extra minutes. Once this is complete, stop the vehicle and allow the brakes to cool down. This should take about 40 minutes or so. This concludes the bedding procedure and you can now use your brakes normally. However, certain restrictions apply. Note on UPS Extended Area Surcharge: This surcharge is levied by UPS, not Max Advanced Brakes. CT, DE, DC, IL, IN, KY, ME, MD, MA, MI, NH, NJ, NY, NC, OH, PA, RI, SC, TN, VT, VA, WV. AL, AZ, AR, CO, FL, GA, IA, KS, LA, MN, MS, MO, NE, SD, WI. CA, ID, MT, NV, NM, ND, OK, OR, TX, UT, WA, WY. Processing time is subject to change depending on holiday schedule & volume of orders.
Front+Rear Drill/Slot Zinc Brake Rotors Ceramic Pads for Buick Lucerne 09-11
High Performance Full Brake Kit. Zinc Coated Drilled and Slotted Brake Rotor + High Performance Ceramic Pads. This Brake Kit Includes. Zinc Brake Rotors: 4pc Ceramic Brake Pads: 8pc —Free Hardware Kit Included. Our Zinc-Coated Rotors feature precision-drilled holes to help lower temperatures during extreme driving conditions. These Slots help achieve safe and smooth braking by wiping away gas or debris to maintain clean contact with the rotor surface. Zinc coating is equally applied over the whole rotor (inside and out), making them ready to install out of the box with no oil to remove. This zinc coating provides long-lasting protection against corrosion and rusting, helping to maintain the rotors appearance, and extend rotor life. Ceramic brake pads are quieter than semi-metallic pads. Under most conditions, they emit little or no sound when the brakes are applied. APF Ceramic Brake Pads combine impressive stopping power with everyday drivability. Ceramic pads are excellent at dispersing heat, helping them deliver consistent performance under a wide range of temperature conditions. Our Zinc Rotors are machined and mill-balanced with a maximum rotor run-out of 0.0032 inches; (0.08mm) and a maximum DTV tolerance specification of 0.0005 inches (0.0125mm). With this precision fine-tuning, performance is guaranteed. Manufacturers defects do not include abnormal operation, damage caused by accidents, cosmetic damages, damage due to negligence, improper installation, damage caused by improper service, damage due to lack of maintenance, noise, normal wear and tear, pitting, rusting, damage from track racing, or damage to zinc plating. Note: Pictures of Brake Rotors, Brake Pads, or packaging may differ from actual product/packaging received. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors”. The seller is “apfparts” and is located in this country: US. This item can be shipped to United States.
- Performance Part: Yes
- Rotor Style: Drill and Slotted
- Material: Cast Iron
- Type: Brake Disc Rotor
- Manufacturer Part Number: ZFK100486
- Pad Material: High Performance Carbon Ceramic
- Fitment Type: Direct Replacement
- Solid or Vented Rotor: Vented
- Mounting Hardware Included: Yes – Hardware included
- Placement on Vehicle: Front, Rear,Right,Left
- Brand: APF – All Performance Friction
- Manufacturer Warranty: 1 Year
- Surface Finish: Zinc Coated
- Custom Bundle: Slotted and Drilled Rotors/Ceramic Brake Pads/Hardware included
- Bundle Description: Everything needed for a Direct Replacement of your OEM Rotors
- Lug or Bolt Hole Quantity – Front: 5
- Lug or Bolt Hole Quantity – Rear: 5