Tag Archives: chrome
For 15-21 Benz W205 C43 Sedan Rear Bumper Difffuser + Chrome Exhaust Tips
For 15-21 Benz W205 C43 Sedan Rear Bumper Difffuser + Chrome Exhaust Tips. Condition: 100% Brand New. Product Material:High Quality ABS Material. Color:Carbon Fiber Style. QC test facility to ensure good quality. Easy installed and No modification needed, double side Automotive tape at the back. Rear Bumper Diffuser Lip With Chrome Exhaust. This item doesn’t come with manual installation. Comparison position And Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc). Please ensure that the product completely fits before proceeding with installation. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting. Carefully place the product in desired location and press down for about 1-2 minutes, Note: do not wash your car for 24-hours. The adhesive should be cured after 12-hours. If the package contains self-tapping screws, tighten the self-tapping screws in turn. (Some Item Don’t Need Hardware). The installation is complete. Why Do We Need To Install The Rear Diffuser? For the appearance of the car to add dynamic Upgrade the visual experience. With Led brake lights, the brakes are more visible and the driving is safer. More stable to increase the grip, the bottom of the car turbulence orderly export, reduce the bottom air lifting force on the body. If there is any problem with our products, pls feel free to contact with us, we will try our best to help you solve it, thanks. Please do not operate anything else. Your account if you accumulate 4 unpaid’s total. Otherwise you are not pleased, simply let me know via e-mial rather than leave low score, and I will do our best to solve any problem. We believe that everything could be solved by communication. We will solve it for you. Sometimes have a little delay due to the weekends or holidays.
Car Front Bumper Grille Chrome For 2015-2020 Cadillac Escalade ESV 6.2L 84051291
More Hot Sell Items. Condition: 100% brand new and high quality. Color: Chrome and Black. Direct fit, no modification requires, easy installation! Installation instruction is not included, professional installation is highly recommended. The oil channels of carburetors will be blocked without cleaning, please clean up the oil channels and air filters as well as use the clean fuel before installing the carburetors. Please kindly understand that the actual color and the size of the item may slightly vary from presented pictures. We will Only Accept. Thank You for Your Understanding and Cooperation. We Offer 60 Days Satisfaction Guarantee.
LABLT Rear Step Bumper Assembly For 1999-2007 Ford F250 F350 Super Duty Chrome
Condition:100% Brand New Color:Chrome. Material:Carbon Steel Type:Bumper Assembly Placement on Vehicle:Rear Fitment Type:Direct Replacement. Interchange Part Number:31003,1C3Z17906DA-PFM, FO1103173. Notice:For Models without Park Assist Holes. Easy to Install Designed as a direct replacement for your step bumper. Durable Finish & Construction Built with steel for lasting strength and style. Premium, chrome finish ready for installation. Ready to restore your vehicle to like-new condition. Benchmark Design and Manufacturing Processes Streamlined manufacturing process keeps costs down and quality high. We strongly recommend professional installation. Due to the fact that all detailed dimensions of the product are manually measured, please allow for measurement errors. Due to lighting issues during photography, the product images in the link may not reflect the actual color of the item. Thank you for collecting our store and looking forward to working with you. Without Park Assist Sensor Cut-out. Any parcel without the Return Authorization Number will be rejected. If your item is faulty or was incorrect, you must contact our sales representative before returning the parcel and we will endeavour to solve the problem effectively. Video or picture is required to show the item condition before we issue the Return Authorization Number. Please return your item(s) in original packaging and ensure that all packages are securely wrapped. We will not accept responsibility for loss or damage of goods during transit, please ensure that. Auto Circuit Wiring Harness. Gear Shift Control Cable. Coolant Water Inlet Pipe. Valve Cover & Gasket. Spark Plug Protective Cover. Auto Inlet & Outlet System. Exhaust And Intake Pipes. Armrest Center Box Cover. Inner Door Panel Handle. ABS Wheel Speed Sensor. Mass Air Flow Sensor. Throttle Position Sensor (TPS). Door Power Window Switch. Brakes & Brake Parts. Clutch & Clutch Parts. Motorcycle Hand Brake Handle. Quick Change Tool Post. Metal Cut Off Wheels. Control Arms & Parts. Front Bumper Grille Guard. Moto Lighting & Lamps. Motorcycle fuel Switch Valve. Fit For Honda CRV CR-V 2015 2016 Front Bumper Upper Trim&Lower Grille Mesh Grill.
Black Vinyl Wrap Kit for Blackout Chrome Delete1 Window Trim Door Trim
Black Vinyl Wrap Kit for Blackout Chrome Delete1 Window Trim Door Trim. Designed for vehicle chrome delete. Pressure Sensitive Self-Adhesive makes the installation process much easier. Dry application is recommended for this product. Air Release channels ensure air bubbles-free installations. Heat Stretchable using a heat gun or household hair dryer which allows more flexibility on curved corners. Protect painted surface from light rock chips, light scratches. Safe for painted surfaces, will not damage the original paint. It can be easily removed by peeling it off using a heat gun or household hair dryer. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Designed for vehicle chrome delete —Pressure Sensitive Self-Adhesive makes the installation process much easier —Dry application is recommended for this product —Air Release channels ensure air bubbles-free installations —Heat Stretchable using a heat gun or household hair dryer which allows more flexibility on curved corners —Protect painted surface from light rock chips, light scratches —Safe for painted surfaces, will not damage the original paint —It can be easily removed by peeling it off using a heat gun or household hair dryer.
Holographic Carbon Fiber Blue Laser Chrome Car Vinyl Wrap Sheet Decal Sticker
Holographic Carbon Fiber Blue Laser Chrome Car Vinyl Wrap Sheet Decal Sticker. Automotive Vinyl Wrap Film. Gloss / Gloss Metallic. Matte / Satin / Matte Metallic. Leather / Suede / Velvet. One Way Vision Privacy. Wrapping & Tinting Tools. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
Holographic Carbon Fiber Black Laser Chrome Vinyl Wrap Sheet Film Decal Sticker
Home
⟩ holographic ⟩ Holographic Carbon Fiber Black Laser Chrome Vinyl Wrap Sheet Film Decal Sticker
Holographic Carbon Fiber Black Laser Chrome Vinyl Wrap Sheet Film Decal Sticker. Automotive Vinyl Wrap Film. Gloss / Gloss Metallic. Matte / Satin / Matte Metallic. Leather / Suede / Velvet. One Way Vision Privacy. Wrapping & Tinting Tools. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
For 95-04 Toyota Tacoma Chrome Trim Steel Rear Step Bumper Face Bar Assembly
Welcome to Speed Daddy. FOR 95-04 TOYOTA TACOMA CHROME TRIM STEEL REAR STEP BUMPER FACE BAR ASSEMBLY. Upgrade and replace your standard or worn rear bumper with a new one. Manufactured to be a direct replacement, installation is a cinch. Plug-n-Play Operation, Direct Bolt-on OE Fitment or Replacement for the Stock Unit. Comes with a Complete Set of Step Pads. Comes without Parking Sensor Holes. Requires no Modification or Drilling. With License Plate Lights. Wax / Polishing recommended for regular maintenance to inhibit Corrosion. 1 X Rear Bumper. Professional Installation is Highly Recommended. Installation Instruction is NOT Included. DOMESTIC LOWER 48 US STATES. We are not responsible for incorrect or undeliverable addresses. Some of the packages cannot be delivered to a PO Box. Package will be held until a valid physical address is provided. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Subscribe to our Newsletter. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Bumpers & Components\Bumpers & Reinforcements”. The seller is “speed_daddy” and is located in this country: US. This item can be shipped to United States.
- Color: Metallic
- Fitment Type: Direct Replacement
- Items Included: Rear Bumper
- Manufacturer Part Number: SDD-ZTLY0122
- Material: Carbon Steel / ABS Plastic
- Superseded Part Number: SDD-ZTLY0122
- Placement on Vehicle: Rear
- Brand: Speed Daddy
- Type: Bumper
- Interchange Part Number: 2283598113
- OE/OEM Part Number: TO1102215
- Attachment Type: Bolt-On
- Style: OE
- Features: Durable, Easy Installation, No Drilling Required
- Finish: Polished