Tag Archives: fiber
Next page →
← Previous page
2D Carbon Fiber Black Glossy Vinyl Wrap Sticker Bubble Free Air Release Sheet. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
3D Carbon Fiber Black Matte Textured Car Vinyl Wrap Sticker Decal Film Sheet DIY. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron): 15C±0.5C. Thickness of film with release liner: 31C±0.5C. Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition). Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack – Easy to reposition). Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. Storing period: 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. Indoor life: 4 years when followed rules of application and use. Outdoor life: 3 years when followed rules of application and use. Application: from +10°? To +20°? , usage from -30°? To +30°? Dimensional stability: shrinkage less than 5%. Breaking Strength: 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive (Easy to Reposition). Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
2D Carbon Fiber High Glossy Black Silver Vinyl Wrap Sticker Air Release Sheet. Free Tool Kit Requirement. Come with Tool Kit. Size of 12″x60″ Include 1 set of Basic Tool Kit. Size of 24″x60″ and above Include 1 set of Deluxe Tool Kit. Thickness of film (C=10 micron). Thickness of film with release liner. Hybrid vinyl film with air channels. (Designed for vehicle exterior with prefect paint condition). Solvent based adhesive, odor: solvent odor. (Low-Medium Tack – Easy to reposition). White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany. 2 years if stored in +10°? To +20°? For optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place. 4 years when followed rules of application and use. 3 years when followed rules of application and use. From +10°? To +20°? , usage from -30°? To +30°? Shrinkage less than 5%. 22.7 N/10mm (Average). Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average). Test Method: ASTM D3330/D3330-04. Light Ageing in UV Exposure. Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor. Exposure cycle: ASTM D4329-13 cycle A. Lamp type: UVA-3408h UV at (60±2.5). Water resistant and weather proof. Flexible and Stretchable for concave area. Low cost to change the look of your vehicles. Easy installation with dry application method. Heat gun or household blow dryer for shaping is required. Low – medium tack self adhesive. Easy to fit in most tight spots or corners (primer 94 is required for non sticky surfaces, curves & corners). Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U. Times during the day. Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage. Always pre-test vinyl installation on vehicles. Due to different monitors/calibrations, colors may vary slightly from the pictures. Film colors can vary slightly from roll to roll. For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl won’t stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. We do have many other items available!!! We would try our best to help you solving any problem. We are trying our best to describe all details of the product here. We will try our best to solve the problem with you. We appreciate your business.
Factory Direct Quality Assurance Best Price. High quality 3K Roll Wrapped Carbon Fiber Tube with 100% full Carbon. Raw Material :Imported Taiwan Or Japan Carbon fiber fabric. Outside 3K +Inside UD Carbon. High Temperature Resistance, Anti-oxidation, Corrosion Resistant, Long Life, High Strength, Light Weight, Stability, Nice surface, Undeformed. High quality 3K Roll Wrapped Carbon Fiber Tube specifications. 3k Weave – Surface Treatment. Glossy/Matt (Black) (Sprayed with UV Resistant Clear Coat). 2119500mm thickness :1.0mm (OD21-ID19)/2=1.0mm. Note: All units are expressed in millime. 1″ =25.4mm For example, OD 21mm (0.83″) x ID 1 19mm (0.75″) x L 500mm (19.69″). High quality 3K Roll Wrapped Carbon Fiber Tube. Anti-corrosion/ Anti-UV/ Ultra-light weight -Our tube is roll Carbon Fiber Tube, not pultrusion tube, roll tube have the longitude and weft yarn, but pultrusion tube only have the longitude, not weft yarn, so, the strength not as well as roll tubes. Incredible strength and stiffnessthe strength is steel’s 9 times, but weight was about 1/3 of steel! Roll Wrapped Carbon Fiber Tubeapplication. Aerospace, RC model parts Helicopters Model drone, gimbal – Decoration parts -Manufacture fixtures and tooling – Industrial automation and robotics – High-grade fixed-wing connecting tube, multi-rotor arm, tripod, Etc. If you have any questions or problems with the items, or the items do not work fine. We will always be happy to help you solve the problems. Please Pay More Attention. We have our own factory, specialized in Carbon Fiber Tube for more then 10years. We can produce carbon fiber tubes (aslo color tubes), rods , plates. We can also provide machine tubes. Batch order and customize size. Please feel free to contact for. You could enjoy more favorable price with larger quantity.
Material: PU Leather + Aluminum. 6.5 X 9.5 X 1.8 cm/2.63.740.7 inch. Aluminum Alloy Card Box (Can Hold 6-8 Credit Cards, Bank Cards), Cash Clip, Two Leather Card Slots. High Quality Material: 100% Leather Surface Softer more Breathable and Glossier, and Perfect Size Aluminum Case Sturdy and , No breaking, No bending. Humanized and easy-to-use design, Y shape month is convenient for you to put your credit cards, ID card into it, C shape month is for you to pull out the cards easily. Lightweight and slim body makes it is suitable to take out with you, you will never feel embarrassed any more for the bulge on the back pockets of your pants. All cards slide out gradually with the automatic pop-up switch, stops the cards from damaging and falling out. Please allow slight size differences due to different manual measurement. Due to the lighting and screen settings, the real color may slightly different from the picture. 1/5/10/20/30/40/50/60/80/100 x Carbon Fiber Style Leather Wallet.
Twill weave carbon fiber cloth is likely the most recognizable carbon fiber weave in the industry. It is used in many cosmetic and decorative applications, but also has great functionality. It has both formability and stability. As the 2×2 name implies, each tow will pass over 2 tows then under two tows. Carbon fiber is preferred as it has the highest tensile strength of all reinforcing materials. The dry 3K 2×2 Twill Weave Fabric gives the classic carbon fiber look and conforms to complex parts better than plain weave. It boasts a combined strength and stiffness-to-weight that is unmatched in the composites industry. In fact, when looking at strength to weight comparisons, carbon fiber outperforms most traditional building materials. Carbon fiber can be found everywhere from auto racing to aerospace. Its unmatched strength and weight, along with its modern cosmetics, have made it a widespread favorite in today’s composite industry. Highly desirable for modern composite parts in the aerospace, auto, marine, and sporting goods industries. This is a first quality commercial grade 3K carbon fiber fabric and is made in the USA. 3K means each tow/bundle is constructed of 3000 filaments. The bundles are woven together to form the fabric, which makes it a strong, yet lightweight material. 3K, 563ksi, 34msi, 1.7% elongation. 6 ounces per square yard. When purchasing multiple quantities of the same fabric you will receive one continuous length of that material.
Braum ® – Pair of Black Leatherette Carbon Fiber Mixed Elite Series Racing Seats with Black Stitches (BRR1-BKBS). Pair of BRAUM Black Leatherette / Carbon Fiber Mixed Sport Reclining Racing Seats with Black Stitches (BRR1-BKBS), Elite Series. Frame: Strong, lightweight powder coated tubular steel frame. Front: High Durability and Scratch Resistant Leatherette. Back: High Durability and Scratch Resistant Carbon Fiber Look PVC. Stitching: High Tensile Strength Black Thread. Faux carbon fiber fabric backing. Bottom mount style (will need vehicle-specific seat brackets). Comes with two seats and dual lock sliders for front-back adjustment. Each (without bracket or sliders). Fits up to 38 waist. The Elite Series seats are wrapped in thick, high quality materials in a sleek, aggressive, race-inspired shape. The result is an understated yet unmistakable silhouette that is at the same time both understated and conspicuous. Spectators will be left scratching their head over their OEM look and aggressive aftermarket appeal. You and your passengers will be pleased to find a handle-type reclining mechanism for quick and easy, factory-like seat adjustments. The Elite Series are exclusive, all-new reclinable racing seats from the up-and-coming innovator of racing equipment: BRAUM. These seats are perfect for those who want to improve the looks, comfort and stability of their seats without sacrificing practicality. They feature a strong, lightweight tubular frame and injection molded foam for the ultimate combination of comfort, performance, and durability. The bolsters are pronounced and strategically shaped without being intrusive, so you can stay locked in and enjoy your drive without dreading the discomfort of ingress and egress that a fixed bucket seat would impose. The firm, high density foam provides excellent support while its heat and pressure sensitivity allows the cushion to soften and comply with your body’s shape for a more customized fit. It is the customer’s responsibility to compare the seats dimensions with the vehicle’s internal space (Please refer to the photo with dimensions). Aftermarket racing seats may be incompatible with modern SRS airbag systems. Though there are ways to bypass the airbag system, BRAUM will not be held liable for any complications that may arise from this. BRAUM is a name synonymous with functionality, high quality, and affordability. BRAUM Offers racing seats, seat brackets, harnesses, harness bars, and accessories to equip every enthusiast with the safety, performance, and peace of mind needed to succeed on and off the track. BRAUM products are designed in the United States, made in ISO certified factories, and inspected and assembled in the United States to ensure that each product meets their high expectations while they pass down the savings to you. Universal – Fits all Vehicles. Package Dimensions (L x W x H) Inch. 42.00 x 22.00 x 22.00. Your monitor settings will affect the item images color. They may or may not reflect the true color of the item. Please understand that we have no control over carriers’ transit time.
Next page →
← Previous page